{"product_id":"se-electronics-v-drum-bundle-1","title":"sE Electronics V Drum Bundle 1","description":"\u003cp\u003eWith touring season just around the corner, live sound deals are heating up with sE Electronics. These fantastic specials on some of the hottest products are good during the month of March. The \u003cstrong\u003esE V Drum Bundle 1\u003c\/strong\u003e is a specially priced bundle including one V Kick Drum mic, one V Beat Drum mic with one V Clip - available for a limited time!\u003c\/p\u003e\r\n\r\n\u003chr\u003e\u003cbr\u003e\r\n\r\n\r\n\u003ch3\u003eV Kick Drum Microphone\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe sE Electronics V Kick Drum Mic is the most compact and versatile drum microphone in its class, intended for use with kick (bass) drums and other sources such as miking bass guitar speaker cabinets, floor toms or other large drums where low-frequency energy is of the utmost importance. Its integrated swivel joint allows for any required mic placement, and its specialized capsule provides a sound character tailored specifically for kick drums, which can be further shaped with the use of two switches on the rear side of the microphone. From warm and classic to modern and aggressive, the V KICK gives you any kick drum sound you need.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eFROM CLASSIC TO MODERN: SWITCHABLE SONIC VOICING\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eTwo switches on the rear side of the V KICK allow you four different sound settings, great for tailoring the sound for your specific project – and ideal for live shows with multiple bands and short changeovers. And since they’re on the back of the mic, these switches are still accessible even if the V KICK is placed inside a kick drum. With the V KICK, you can always make the right choice with just a single microphone.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe left-hand switch shapes the microphone’s overall voicing, with two selectable options. “Classic” provides a more traditional kick drum sound with a familiar low frequency punch and a warmer, more rounded sound. If a more contemporary, aggressive sound is desired, the “Modern” setting emphasizes the low end and high end (a “scooped” sound).\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe right-hand switch specifically tailors the microphone’s high-frequency character. “Classic” provides a typical bite in the upper midrange (presence boost) and a more rounded and familiar sound, while “Modern” provides an open, clear and transient-rich top end for a more contemporary, aggressive drum sound. Each of these switches is recessed slightly into the mic body to prevent unintentional adjustment, and requires a small flathead screwdriver or similar implement to switch between settings.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe V KICK also has an integrated swivel joint that allows for easy positioning inside or outside a kick drum. Its extremely low profile allows it to fit easily through the drum head port, and the XLR cable and mic stand mount are in parallel to minimize cable clutter.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eTHE MOST COMPACT KICK DRUM MIC ON THE MARKET\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe V KICK’s extremely low profile allows for effortless placement outside or inside a kick drum, with a wide range of swivel for easy positioning. And with the stand mount and the XLR connector mounted side-by-side in parallel on the underside of the mic, your mic cables stay flush with the mic stand – no cable clutter, completely minimal footprint, and easy to place anywhere.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eTHE HEART OF THE V KICK: THE DMC7 SB CAPSULE\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe all-new custom DMC7 SB capsule offers the same technologies and features as its siblings within the acclaimed V7 and V7 X, including the innovative, specialized aluminum voice coil. While the V7 X is optimized for most other instruments, the capsule in the V KICK has been custom-tuned for the very lowest and loudest tones. With aluminum being a much lighter material than the industry standard (copper), it delivers an open and transient-rich sound, with effortless capture of low frequency energy and punch. The midrange is also extremely balanced, supporting the natural resonances of percussive instruments.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe excellent off-axis rejection of this sophisticated capsule also helps isolate your kick drum from other sound sources on the stage - efficiently reducing stage bleed and spill from snare, toms, hi-hat and more. The supercardioid pattern also allows you to easily tailor the bottom-end by adjusting the proximity effect – i.e. distance to the sound source.\u003c\/p\u003e\r\n\r\n\u003cp\u003eProven Neodymium magnets, tight production tolerances and high workmanship ensure excellent sensitivity, high-end sound quality and superb consistency.\u003c\/p\u003e\r\n\r\n\r\n\r\n\r\n\u003chr\u003e\u003cbr\u003e\r\n\r\n\r\n\u003ch3\u003eV Beat Microphone\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe sE Electronics V Beat Drum Mic is the most compact drum microphone in its class, intended for use with snare or tom drums. Unlike the V7, which is optimized for vocals, the V BEAT features the same high-grade sonic performance as the V7 X instrument dynamic, but in a dedicated low-profile \u0026amp; drum-friendly form factor. Tuned for instrumental use, it can also be used on sources such as electric guitar speaker cabinets or brass instruments. Its specialized capsule provides a highly detailed, extremely natural sound character on snares or toms of any size, with amazing off-axis rejection to minimize bleed from nearby drums and cymbals. Its ultra-compact design and parallel XLR connector \u0026amp; stand mount give it the smallest footprint in its class, and its rock-solid swivel mount allows its angle to be adjusted with great precision – so it can be aimed at almost any part of the drum head to achieve whatever sound character is required.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eCOMPACT, FLEXIBLE, AND MINIMALIST DESIGN\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe V BEAT utilizes an extremely low-profile mechanical design, with the XLR connector and stand mount integrated in parallel on the underside of the flexible swivel mount. This minimizes the V BEAT’s footprint, removes any cables from line-of-sight, and negates the need for any right-angle adapters or special cables. It also means there’s no danger of cables interfering with the drummer’s performance, as they are kept out of the way of cymbals and drum sticks alike.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eTHE HEART OF THE V BEAT: THE DMC7 X CAPSULE\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe custom DMC7 X capsule offers the same technologies and features as its sibling within the acclaimed V7, including the innovative, specialized aluminum voice coil. While the V7 is optimized for vocals, the capsule in the V BEAT has been custom-tuned for instrumental use. With aluminum being a much lighter material than the industry standard (copper), it delivers an open and transient-rich sound, with deep and clear lows for stellar performance. The midrange is also extremely balanced, supporting the natural resonances of percussive instruments.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe excellent off-axis rejection of this sophisticated capsule also helps isolate your drums from other sound sources on the stage - efficiently reducing stage bleed and spill from other drums, cymbals and more. The supercardioid pattern also allows you to easily tailor the bottom-end by adjusting the proximity effect – i.e. distance to the drum head.\u003c\/p\u003e\r\n\r\n\u003cp\u003eProven Neodymium magnets, tight production tolerances and high workmanship ensure excellent sensitivity, high-end sound quality and superb consistency.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eFEATURES:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eThe most compact drum mic in its class\u003c\/li\u003e\r\n\u003cli\u003eSuperior sound quality with massive flexibility\u003c\/li\u003e\r\n\u003cli\u003eSpecialized capsule designed to bring your drums to life\u003c\/li\u003e\r\n\u003cli\u003ePatented internal shock mount\u003c\/li\u003e\r\n\u003cli\u003eSophisticated supercardioid capsule design for superior isolation and rejection of unwanted noise\u003c\/li\u003e\r\n\u003cli\u003eAll-metal housing with premium finish\u003c\/li\u003e\r\n\u003cli\u003eStainless spring steel mesh grille - dent-proof and corrosion-free\u003c\/li\u003e\r\n\u003cli\u003eInternal windscreen efficiently reduces unwanted wind noise and plosives\u003c\/li\u003e\r\n\u003cli\u003eGold-plated XLR connector for loss-free and reliable signal connection\u003c\/li\u003e\r\n\u003cli\u003eKnurled nut for 3rd-party hardware includes a smaller-diameter nut that does not block the XLR connector\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003chr\u003e\u003cbr\u003e\r\n\r\n\r\n\u003ch3\u003eV Clip\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe sE Electronics V Clamp for Drum Mic is the fastest, most compact and most practical drum mic mounting system on the market, and is compatible with any popular snare or tom drum. It was designed as the perfect companion to sE’s V BEAT for snare or tom miking purposes, but it is also compatible with many other popular microphones. Its sturdy elastic clamp enables setup and tear-down within seconds, and its robust, bulletproof design is built for use on the road. The height and rotation of the connected microphone can be easily changed by loosening the V CLAMP’s knob and adjusting the position of the rod, allowing perfect positioning for any desired drum tone, or to minimize spill from nearby drums.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eCompatible with a huge range of snare and tom drums\u003c\/li\u003e\r\n\u003cli\u003eElastic clamp makes setup simple and fast\u003c\/li\u003e\r\n\u003cli\u003eVertically adjustable rod allows for many mic placement options\u003c\/li\u003e\r\n\u003cli\u003eRobust, bulletproof design – built for the road\u003c\/li\u003e\r\n\u003cli\u003eSturdy metal and high-grade, proven thermoplastic parts\u003c\/li\u003e\r\n\u003cli\u003eCorrosion-free materials and finishing\u003c\/li\u003e\r\n\u003cli\u003eExtremely compact dimensions for easy placement\u003c\/li\u003e\r\n\u003cli\u003eDesigned to fit any popular snare or tom drum available\u003c\/li\u003e\r\n\u003cli\u003eSetup and tear-down takes only seconds\u003c\/li\u003e\r\n\u003cli\u003eThree axes of movement for maximum flexibility\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"sE Electronics","offers":[{"title":"Default Title","offer_id":47248555540617,"sku":"116095","price":397.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/se-v-drum-bundle-1_116095_1_4207a36d-f915-4de4-b3e2-86e947446ff2.jpg?v=1784048387","url":"https:\/\/vintage-king-staging.myshopify.com\/products\/se-electronics-v-drum-bundle-1","provider":"Vintage King Staging","version":"1.0","type":"link"}