Red Panda Remote 4 for Tensor

The Red Panda Remote 4 is a Tensor remote switch with 4 modes to access presets and pedal functions. Scribble strips above each switch can be labeled with a Sharpie and erased using isopropyl alcohol. It connects to the Tensor via a 1/4" TRS cable (included). The Tensor firmware needs to be version 1.1 or later. The Remote 4 does not require power.

Configuring the Remote Switch:

1. Start with the pedal powered on and nothing plugged into the CTRL port.
2. Hold the right footswitch while plugging in the remote switch. The right LED will blink yellow 3 times to indicate it is in CTRL configuration mode. You can release the right footswitch and begin configuration immediately.
3. Press one of the buttons on the remote switch to select a mode.
4. Hold the right footswitch for 2 seconds to save the configuration. The right LED will blink green to indicate that the configuration has been saved.