{"title":"ATC Loudspeakers","description":"\u003cdiv class=\"brand-description\"\u003e\n  \u003ch2 class=\"brand-description__heading\"\u003eA Deeper Look At ATC's History\u003c\/h2\u003e\n  \u003csection class=\"brand-description__row\"\u003e\n    \u003cdiv class=\"brand-description__row-media\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc_bottom_1.jpg?v=1784152860\" alt=\"ATC Loudspeakers\" loading=\"lazy\"\u003e\u003c\/div\u003e\n    \u003cdiv class=\"brand-description__row-content\"\u003eATC began building custom units in 1974, mainly a range of 12” drivers for the PA industry. ATC introduced the 12″ PA75-314 driver, a design capable of handling more power and producing less distortion at a higher sound pressure level than any other unit on the market. As bands like Supertramp began to use these drivers in live rigs, ATC began to gain recognition. Roughly a year later, ATC launched a 3-inch soft dome midrange with better dispersion, wider bandwidth, and lower distortion. The driver, known as the SM 75-150, became a mainstay in the product line, boasting a wide frequency range, high power handling, and neutral sound characteristics. Today, the SM 75-150 is installed in several 3-way models from the SCM-40 up to the SCM-300. \r\n\u003cbr\u003e\r\n\u003cbr\u003e\r\nATC founder Billy Woodman emphasized the importance of using quality midrange drivers when the company started. For ATC, the performance of its loudspeakers depends on an accurate midrange; performance is never compromised in this area. In the late ‘90s, Billy Woodman and his research team developed an innovative new driver topology designed to eliminate the effects of magnetic hysteresis as a significant source of distortion in loudspeaker drive units. For better efficiency, the back plate, pole, magnet, and front plate are magnetized as a singular unit, as opposed to magnetizing each individual component. All ATC drivers are made using fine materials such as pure copper wire with high-temperature enamel for unquestionable reliability at extreme power levels.\u003c\/div\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"brand-description__row brand-description__row--reverse\"\u003e\n    \u003cdiv class=\"brand-description__row-media\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc_bottom_2.jpg?v=1784152863\" alt=\"ATC Loudspeakers\" loading=\"lazy\"\u003e\u003c\/div\u003e\n    \u003cdiv class=\"brand-description__row-content\"\u003eThe dual suspension tweeters used in ATC loudspeakers are made from the same materials and engineering methods used to make the soft dome midrange drivers. This practice ensures consistency across the entire range of loudspeakers. Each 25mm tweeter is mounted and loaded into a high-powered neodymium magnet assembly. The tweeter’s low harmonic distortion and extended top end capabilities are a result of engineering methods that contribute to the goal of attaining neutral fidelity and high dynamic range. ATC took it a step further and designed an ‘S’ version of their original SH25-76 with a superior motor for vanishing harmonic distortion levels. By putting every tweeter through rigorous testing and QC measures, ATC is able to stand confidently behind the quality espoused in their philosophy.\u003c\/div\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"brand-description__row\"\u003e\n    \u003cdiv class=\"brand-description__row-media\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc_bottom_3.jpg?v=1784152867\" alt=\"ATC Loudspeakers\" loading=\"lazy\"\u003e\u003c\/div\u003e\n    \u003cdiv class=\"brand-description__row-content\"\u003eThe ATC SCM300ASL active 3-way studio reference monitors stand tall at the top of the ATC collection of far-field models. These large format main monitors are equipped with 1.25” soft dome tweeters, twin full spec Super Linear 15” bass drivers, and a 3” Super Dome midrange driver. They’re the necessary choice for commercial recording studios and post-production houses. For something smaller, consider the SCM110ASL with its 9” Super Linear bass drivers. It’s installed with the same dual-suspension S-Spec tweeter and soft dome midrange driver as its older brother. Due to its compact size, the SCM110ASL is perfect for mid-sized facilities. ATC far-field monitors are in a league of their own.\u003c\/div\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"brand-description__row brand-description__row--reverse\"\u003e\n    \u003cdiv class=\"brand-description__row-media\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc_bottom_4.jpg?v=1784152870\" alt=\"ATC Loudspeakers\" loading=\"lazy\"\u003e\u003c\/div\u003e\n    \u003cdiv class=\"brand-description__row-content\"\u003eATC mid-field and near-field monitors are equally prolific. The SCM150ASL is based on the SCM300ASL, sporting the same tweeter and drivers. This model is fitted with a 350W Tri-Amp Pack amplifier to deliver phenomenal output, as well as an LF control with five different bass settings to tune the low end to an appropriate level for any environment. Like the far-field lineup, ATC has a more compact monitoring option for mid-sized studios: the SCM100ASL. There is  also a long range of active near-field studio monitors for smaller rooms, including the SCM25A, SCM20ASL and the SCM12. These 2-way systems deliver clear, neutral sound without any noticeable levels of distortion while listening critically to source audio material.\u003c\/div\u003e\n  \u003c\/section\u003e\n  \u003csection class=\"brand-description__row\"\u003e\n    \u003cdiv class=\"brand-description__row-media\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc_bottom_5.jpg?v=1784152874\" alt=\"ATC Loudspeakers\" loading=\"lazy\"\u003e\u003c\/div\u003e\n    \u003cdiv class=\"brand-description__row-content\"\u003eTo access an extended low-end, consider one of the subwoofers. The SCM0.1\/15SL is a powerful 15” active sub driven by a 450W Class G amplifier featuring intuitive gain and variable cutoff frequency controls to sculpt deep low-end. The 12SL offers the same rich lows with a 12” Super Linear bass driver instead. Both designs are built true to the same philosophy behind the 2-way and 2-way monitors. These downward-firing subs are a great complement to any stereo setup. No matter which studio monitoring setup you decide on, you’ll take the right path by choosing ATC. So don’t wait! Order your ATC Monitors, Loudspeakers, and more here at Vintage King Audio.\u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e","products":[{"product_id":"atc-loudspeakers-scm16a-active","title":"ATC Loudspeakers SCM16A Active - Pair","description":"\u003cp\u003eSharing a genuine professional heritage with ATC’s famous Active 20 Pro loudspeaker, the \u003cstrong\u003eATC Loudspeakers 16A\u003c\/strong\u003e’s solid, curved, cast- aluminum enclosure is exceptionally rigid and acoustically inert. \u003cbr\u003e\u003cbr\u003e The ATC Loudspeakers 16A features a neodymium 25mm soft dome tweeter.  ATC’s new Constrained Layer Damping (CLD) technology has been utilized for the 150mm mid-bass driver (incorporating with a 45mm integral soft dome).\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e       \u003cspan class=\"style77\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247302393993,"sku":"12039","price":3995.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc_loudspeakers_scm16a_active_pair_1.jpg?v=1784052391"},{"product_id":"atc-loudspeakers-scm-200asl","title":"ATC Loudspeakers SCM200ASL Pro 3-Way Active Monitor - Pair","description":"\u003cp\u003eThe \u003cstrong\u003eATC SCM200ASL Pro\u003c\/strong\u003e is a three-way active main studio monitor capable of continuous SPLs up to 118dB\/1m.\u003cbr\u003e\u003cbr\u003eThe HF, mid and twin 314mm Super Linear bass drivers are driven by a separate 850W per channel amplifier block.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247303508105,"sku":"6678","price":51990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc_scm200_60a1a933-8e16-4014-9d60-9ae93cee3d2a.jpg?v=1784052396"},{"product_id":"atc-loudspeakers-scm300asl","title":"ATC Loudspeakers SCM300ASL 3-Way Active Monitor - Pair","description":"\u003cp\u003eBased on the same mid and HF drivers, and the same amplifier block as the ATC SCM200A Pro, the \u003cstrong\u003eATC SCM300A\u003c\/strong\u003e employs larger 375mm bass drivers and a larger 300 liter enclosure to deliver even higher maximum volume (121dB\/1m), with extended bass and increased transient headroom.\u003c\/p\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247303639177,"sku":"358","price":62990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-scm-300a_358_1.jpg?v=1784052396"},{"product_id":"atc-loudspeakers-scm110asl","title":"ATC Loudspeakers SCM110A Pro 3-Way Active Monitor - Pair","description":"\u003cp\u003eThe \u003cstrong\u003eATC Loudspeakers SMC 110A Pro\u003c\/strong\u003e is a compact, active three-way reference monitor. Designed with high-resolution sample rates and bit depths in mind for both stereo and multi-channel applications that feature a dedicated center channel and subwoofer system, the low-profile SMC 110A comprises twin 9-inch ATC SL bass drivers, an ATC 3\" soft dome mid and a soft dome one-inch tweeter. Maintaining the strict performance criteria of the taller models of ATC reference monitors, the SMC 110A offers a low profile specifically designed for better sight lines through windows and below obstructions.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDrivers: HF 25 mm, Mid 75 mm, LF 2x 234 mm\u003c\/li\u003e\r\n\u003cli\u003eAmplitude Linearity (±2 dB): 50 Hz - 17 kHz\u003c\/li\u003e\r\n\u003cli\u003eCut-off Frequencies (-6 dB, free-standing): 30 Hz, 22 kHz\u003c\/li\u003e\r\n\u003cli\u003eHorizontal Dispersion: ±80°, Coherent\u003c\/li\u003e\r\n\u003cli\u003eVertical Dispersion: ±10°, Coherent\u003c\/li\u003e\r\n\u003cli\u003eMax. Continuous SPL (1 meter): 115 dB\u003c\/li\u003e\r\n\u003cli\u003eCrossover Frequencies: 380 Hz, 3.5 kHz\u003c\/li\u003e\r\n\u003cli\u003eInput Connectors: Male XLR\u003c\/li\u003e\r\n\u003cli\u003eInput Sensitivity: 1 V\u003c\/li\u003e\r\n\u003cli\u003eInput Sensitivity Trim: ±6 dB\u003c\/li\u003e\r\n\u003cli\u003eInput Impedance: Balanced \u0026gt; 10 kΩ\u003c\/li\u003e\r\n\u003cli\u003eAmplifier Output: Bass 200 W, Mid 100 W, High 50 W\u003c\/li\u003e\r\n\u003cli\u003eFilters: Even Order Critically Damped\u003c\/li\u003e\r\n\u003cli\u003eOverload Protection: Active FET momentary gain reduction plus thermal tweeter protection\u003c\/li\u003e\r\n\u003cli\u003eFront Panel Indicators: Power On indicator, Gain Reduction warning\u003c\/li\u003e\r\n\u003cli\u003eLF EQ: +6 dB @40 Hz\u003c\/li\u003e\r\n\u003cli\u003eDimensions (HxWxD): 715 x 625 x 420 mm (28.2˝ x 24.5˝ x 16.5˝) Depth with amplifier at rear adds 3˝\u003c\/li\u003e\r\n\u003cli\u003eWeight: 73 kg\/160.6 lb\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247303606409,"sku":"356","price":23490.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-scm110a_356_1_3f7150ca-7497-4839-8194-13e60ba4617f.jpg?v=1784052397"},{"product_id":"atc-loudspeakers-scm100asl","title":"ATC Loudspeakers SCM100A Pro 3-Way Active Monitor - Pair","description":"\u003cp\u003eWith state-of-the-art driver technology and class-leading amplifiers, \u003cstrong\u003eATC SCM100A Pro\u003c\/strong\u003e studio monitors deliver unparalleled performance. The ATC SCM100A Pro is an active three-way studio monitor designed for reference monitoring in larger rooms. Based on ATC’s best-selling SCM50A Pro designed SCM100A Pro studio monitors features the same S-Spec tweeter and Super Dome midrange driver, with 12-inch Super Linear bass driver for an extended low end down to 32 Hz. With pristine sound, impressive headroom and exceptional imaging SCM100A Pro studio monitors are the ultimate reference monitor for professional music and film audio productions.\u003c\/p\u003e\r\n\u003ch3\u003eSUPER LINEAR DRIVER\u003c\/h3\u003e\r\n\u003cp\u003eEquipped with a cutting-edge 12-inch Super Linear bass driver, SCM100A Pro studio monitors deliver deep, powerful low end down to 32 Hz. ATC’s renowned Super Linear drivers feature a proprietary underhung voice coil design, which produces vanishingly low distortion, even at high volume levels.\u003c\/p\u003e\r\n\u003ch3\u003eSUPER DOME DRIVER\u003c\/h3\u003e\r\n\u003cp\u003eIn order to deliver a balanced, even frequency response, SCM100A Pro studio monitors are equipped with ATC’s legendary 3-inch Super Dome midrange driver. Featuring a completely linear low-distortion drive system Super Dome drivers offer exceptionally low coloration, high power handling capacity and high output level.\u003c\/p\u003e\r\n\u003ch3\u003eS-SPEC TWEETER\u003c\/h3\u003e\r\n\u003cp\u003eThe ATC SCM100A Pro features a 1-inch soft dome S-spec tweeter with an innovative dual suspension design for pristine highs. S-spec tweeters combine an exceptionally powerful motor assembly with a lightweight coil former for minimal distortion and an extended frequency range up to 22 kHz. Unlike conventional tweeters, S-spec tweeters offer far greater control of the voice coil and dome motion, especially at higher sound pressure levels. By reducing internal distortion, S-spec tweeters deliver improved clarity and definition, and significantly reduce listener fatigue. And since they contain zero ferro fluid, they’ll never wear out.\u003c\/p\u003e\r\n\u003ch3\u003eIMPRESSIVE AMPLIFICATION\u003c\/h3\u003e\r\n\u003cp\u003eWith a high-performance tri-amped design, SCM100A Pro studio monitors offer a maximum SPLs of up to 112 dB. Six optimally-matched MOS-FET amp blocks pump out over 350 watts of power for crystal-clear distortion-free sound. With 200 W powering the Super Linear bass driver, 100 W powering the Super Dome midrange driver, and an additional 50 W for the S-Spec tweeter, SCM50A Pro studio monitors offer impressive headroom and class-leading transparency at any volume level. The built-in LF contour control provides five bass boost settings, making it easy to dial in the right amount of low-end in any environment.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDrivers: HF 25 mm, Mid 75 mm, LF 314 mm\u003c\/li\u003e\r\n\u003cli\u003eAmplitude Linearity (±2 dB): 65 Hz - 17 kHz\u003c\/li\u003e\r\n\u003cli\u003eCut-off Frequencies (-6 dB, free-standing): 32 Hz, 22 kHz\u003c\/li\u003e\r\n\u003cli\u003eHorizontal Dispersion: ±80°, Coherent\u003c\/li\u003e\r\n\u003cli\u003eVertical Dispersion: ±10°, Coherent\u003c\/li\u003e\r\n\u003cli\u003eMax. Continuous SPL (1 meter): 115 dB\u003c\/li\u003e\r\n\u003cli\u003eCrossover Frequencies: 380 Hz, 3.5 kHz\u003c\/li\u003e\r\n\u003cli\u003eInput Connectors: Male XLR\u003c\/li\u003e\r\n\u003cli\u003eInput Sensitivity: 1 V\u003c\/li\u003e\r\n\u003cli\u003eInput Sensitivity Trim: ±6 dB\u003c\/li\u003e\r\n\u003cli\u003eInput Impedance: Balanced \u0026gt; 10 kΩ\u003c\/li\u003e\r\n\u003cli\u003eAmplifier Output: Bass 200 W, Mid 100 W, High 50 W\u003c\/li\u003e\r\n\u003cli\u003eFilters: Even Order Critically Damped\u003c\/li\u003e\r\n\u003cli\u003eOverload Protection: Active FET momentary gain reduction plus thermal tweeter protection\u003c\/li\u003e\r\n\u003cli\u003eFront Panel Indicators: Power On indicator, Gain Reduction warning\u003c\/li\u003e\r\n\u003cli\u003eLF EQ: +6 dB @40 Hz\u003c\/li\u003e\r\n\u003cli\u003eDimensions (HxWxD): 832 x 398 x 581 mm (32.8˝ x 15.7˝ x 22.9˝) Depth with amplifier at rear adds 3˝\u003c\/li\u003e\r\n\u003cli\u003eWeight: 65 kg\/143 lb\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247303835785,"sku":"353","price":21990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-scm100asl_353_1.jpg?v=1784052398"},{"product_id":"atc-loudspeakers-scm20asl","title":"ATC Loudspeakers SCM20ASL - Pair","description":"\u003cp\u003eThe new \u003cspan style=\"font-weight: bold;\"\u003eATC SCM20ASL\u003c\/span\u003e Pro brings together the experience and tradition of 20 years of ATC design with the latest advances in materials technology, and a radical design of speaker cabinet.  The result is a highly portable active monitor capable of high volume and unerring accuracy - the ultimate transportable monitor system. By employing a Super Linear magnet in a new version of the renowned 150mm mid\/bass drive unit, along with a 25mm tweeter, the SCM20ASL Pro delivers true reference monitoring that you would expect only in a large three-way monitor.\u003cbr\u003e\u003cbr\u003eThe active two-way design incorporates two separate amplifier blocks in each cabinet - 250W for bass\/mid and 50W for high frequencies - and will deliver continuous SPLs of up to 108Db\/1M. Right up to the highest volume, however, the matched amp and driver system maintains ultra-low distortion, solid stereo imaging, and a high degree of linearity.\u003cbr\u003e\u003cbr\u003eA rear panel selector provides five different LF boost settings, as well as a flat reference setting, tailoring the SCM20ASL Pro's low end response to different monitoring environments.  The elegant lines of the die cast aluminium cabinet are functional as well as aesthetic, incorporating a carry handle and large cooling fins, and providing superb structural integrity.  Universal Omnimount fixings are built into the cabinet, for flying or wall mounting.\u003c\/p\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247303868553,"sku":"357","price":7195.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc_loudspeakers_scm20asl_pair_1.jpg?v=1784052397"},{"product_id":"atc-loudspeakers-scm150asl","title":"ATC Loudspeakers SCM150A Pro 3-Way Active Monitor - Pair","description":"\u003cp\u003eThe \u003cstrong\u003eATC Loudspeakers SCM150A Pro\u003c\/strong\u003e is a further development of the SCM100A Pro, substituting a larger 375 mm Super Linear bass driver, and increasing the enclosure size to 150 liters. The result is extended bass, greater headroom, and even more dynamic range.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDrivers: HF 25 mm, Mid 75 mm, LF 375 mm\u003c\/li\u003e\r\n\u003cli\u003eAmplitude Linearity (±2 dB): 60 Hz - 17 kHz\u003c\/li\u003e\r\n\u003cli\u003eCut-off Frequencies (-6 dB, free-standing): 25 Hz, 22 kHz\u003c\/li\u003e\r\n\u003cli\u003eHorizontal Dispersion: ±80°, Coherent\u003c\/li\u003e\r\n\u003cli\u003eVertical Dispersion: ±10°, Coherent\u003c\/li\u003e\r\n\u003cli\u003eMax. Continuous SPL (1 meter): 117 dB\u003c\/li\u003e\r\n\u003cli\u003eCrossover Frequencies: 380 Hz, 3.5 kHz\u003c\/li\u003e\r\n\u003cli\u003eInput Connectors: Male XLR\u003c\/li\u003e\r\n\u003cli\u003eInput Sensitivity: 1V\u003c\/li\u003e\r\n\u003cli\u003eInput Sensitivity Trim: ±6 dB\u003c\/li\u003e\r\n\u003cli\u003eInput Impedance: Balanced \u0026gt; 10 kΩ\u003c\/li\u003e\r\n\u003cli\u003eAmplifier Output: Bass 200 W, Mid 100 W, High 50 W\u003c\/li\u003e\r\n\u003cli\u003eFilters: Even Order Critically Damped\u003c\/li\u003e\r\n\u003cli\u003eOverload Protection: Active FET momentary gain reduction plus thermal tweeter protection\u003c\/li\u003e\r\n\u003cli\u003eFront Panel Indicators: Power On indicator, Gain Reduction warning\u003c\/li\u003e\r\n\u003cli\u003eLF EQ: +6 dB @ 40 Hz\u003c\/li\u003e\r\n\u003cli\u003eDimensions (HxWxD): 884 x 498 x 568 mm (34.8˝ x 19.6˝ x 25.5˝) Depth with amplifier at rear adds 3˝\u003c\/li\u003e\r\n\u003cli\u003eWeight: 75 kg\/165 lb\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247303934089,"sku":"355","price":25490.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-scm150a_355_1_a7948688-8019-4176-afe3-bdab41c2a89d.jpg?v=1784052397"},{"product_id":"atc-loudspeakers-scm50asl","title":"ATC Loudspeakers SCM50A Pro 3-Way Active Monitor - Pair","description":"3 Way mid-field monitor for music\/film","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247303901321,"sku":"359","price":18490.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-scm50asl_359_1_6c577074-3390-4023-af58-5a68c92f7cac.jpg?v=1784052398"},{"product_id":"atc-loudspeakers-scm11-pair-black-ash","title":"ATC Loudspeakers SCM11 - Pair, Black Ash","description":"The \u003cb\u003eATC Loudspeakers SCM11\u003c\/b\u003e is a full size monitor offering a high-end full musical sound at a reasonable price and size. Capable of musical peaks of 108db and coming from a heritage of musical loudspeakers, the ATC SCM11 is something you must take a listen to. \u003cbr\u003e\u003cbr\u003e The SCM11 employs all the specialist ’soft dome’ technology found in the reference systems we build for the recording industry. \u003cbr\u003e\u003cbr\u003e It is this design feature among others that contribute to the wide bandwidth and exceptional dynamic range of this outstanding new loudspeaker. \u003cbr\u003e\u003cbr\u003e Available in real wood veneers and ‘professional black’ finish, the SCM11 offers all the unique sonic advantages for which ATC speakers are valued the world over at a new competitive price point. \u003cbr\u003e\u003cbr\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247304589449,"sku":"12040","price":1327.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc_scm-11_pair_black_ash.jpg?v=1784052400"},{"product_id":"atc-loudspeakers-scm20sl-pair","title":"ATC Loudspeakers SCM20SL - Pair","description":"\u003cp\u003eIntroducing the new \u003cstrong\u003eATC passive SCM20SL loudspeakers\u003c\/strong\u003e.  This offering represents ATC's first venture into the U.S. pro market with a passive monitor.  Maintaining the strict performance criteria of ATC reference monitors, the SCM 20SL offers project and home studios the dynamic range and pristine imaging ATC is known for worldwide. \u003cbr\u003e\u003cbr\u003eDesigned to fit within the company's highly-regarded line of speakers, the ATC \"Passive 20\" features the same woofer and tweeter as the active (SCM20ASL) version of the speaker. The SCM20SL passives are housed in a conventional \"pro-black\" box for easy placement on any meter bridge. \u003cbr\u003e\u003cbr\u003eATC recommends amplifiers with at least 200W per channel of power.  The Passive 20 loudspeaker enables ATC speaker fans to own a high performance monitor at half the price of the actives. \u003cbr\u003e\u003cbr\u003eThe SCM20SL Passive low-frequency section is a hybrid design incorporating a 150mm bass cone with a grafted 75mm soft dome for mid-range assist.  The woofer magnet assembly utilizes ATC's unique \"SL\" technology to greatly reduce third harmonic distortion and reveal mistakes and details.  All ATC drivers are manufactured in-house to exacting tolerances and are legendary for their many design innovations. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMax Continuous SPL: 108dB \u003c\/li\u003e\n\u003cli\u003eCrossover: 2.8kHz\/ Internal, 2nd order, \u003c\/li\u003e\n\u003cli\u003epassive \u003c\/li\u003e\n\u003cli\u003eWoofer: ATC 6.5\"SL \u003c\/li\u003e\n\u003cli\u003eTweeter: 1\" dome \u003c\/li\u003e\n\u003cli\u003eH\/W\/D in inches: 17.3\/9.9\/11.9 \u003c\/li\u003e\n\u003cli\u003eWeight: 44lbs ea. \u003c\/li\u003e\n\u003cli\u003eShipping Weight: 50lbs ea \u003c\/li\u003e\n\u003cli\u003eCabinet: wood, black ash\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247304622217,"sku":"9977","price":2969.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc_scm20sl_pair.jpg?v=1784052400"},{"product_id":"atc-loudspeakers-pa65-active-pa-speaker-single","title":"ATC Loudspeakers PA65 Active PA Speaker - Single","description":"\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica; font-size: x-small;\"\u003eThe \u003cspan style=\"font-weight: bold;\"\u003eATC PA65\u003c\/span\u003e live sound speaker system was initially developed from the company's popular SCM150ASL active studio monitors and have been installed in such high-end London nightclubs as Chinawhite and MO*VIDA.  With the live sound market's growing interest in high-end audio products to significantly improve the sound quality of clubs and a variety of live sound venues, ATC decided to modify their prestigious 150s and offer the PA65s for live sound applications.  The reaction is stunning.  It's definitely the future for live sound.\u003cbr\u003e\u003cbr\u003eThe three-way active PA65 system comprises an ATC Super Linear 15-inch bass driver, a 3\" Soft Dome mid-range driver and a 1.25\" fabric dome tweeter.  ATC three-channel Class A\/B amplifiers deliver 200 watts to the low-frequency driver, 100 watts to the mid-range and 50 watts to the tweeter.  All amplifier channels feature active momentary gain reduction.\u003cbr\u003e\u003cbr\u003eEach three-way active enclosure is capable of generating a maximum SPL of 116dB.  Each cabinet offers ±80 degrees of horizontal, coherent dispersion with ±10 degrees in the vertical plane. Crossover frequencies are set at 380Hz and 3.5kHz.  The PA65s come with flying hardware.  For a demonstration of the PA65s, visit Booth #861 at AES.\u003cbr\u003e\u003cbr\u003eATC hand builds the most accurate professional reference loudspeakers in the world.  All drive units are powered by individual amplifiers optimized for the driver's bandwidth, delivering balanced maximum sound pressure levels, substantial transient headroom with improved driver protection and precision control over speaker diaphragm travel.  Even order filtered active crossovers are individually aligned at the factory and phase corrected for superb stereo imaging.\u003c\/span\u003e\u003c\/p\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247322710153,"sku":"7358","price":9400.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc_loudspeakers_pa65_active_pa_speaker_single.jpg?v=1784052457"},{"product_id":"atc-loudspeakers-scm25a-pro-pair","title":"ATC Loudspeakers SCM25A Pro Compact Active 3-Way Monitor - Pair","description":"\u003cp\u003eThe ATC SCM Series are the first professional studio monitors to feature a custom-designed 3” mid-range driver for enhanced detail and clarity. The \u003cstrong\u003eATC SCM25A Pro\u003c\/strong\u003e also features a 7” bass driver to deliver an extended low frequency response. Designed for near or mid-field monitoring, the SCM25A Pros are perfect for professional producers, engineers and artists.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe SCM25A Pro is the smallest in the SCM Series and features a 25 mm neodymium soft dome tweeter, a hand-built 3” soft dome mid driver, and a hand-built 7˝ carbon-paper cone bass driver. The built-in 235 W class A\/B 3-way amplifier delivers a crystal-clear frequency response even at high volumes. SCM Series monitors undergo individual frequency, gain and phase optimization at the ATC manufacturing facility.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eONE OF A KIND\u003c\/h3\u003e\r\n\r\n\u003cp\u003eUnlike most studio monitors, the SCM Series monitors aren’t going to make your music sound better, they’re going to point out every little flaw in your mix, and that’s the point. Hi-fi speakers are great for listening to records, but when you’re actually making records you need a neutral monitor that reveals as much information as possible.\u003c\/p\u003e\r\n\r\n\u003cp\u003eSpeakers with hyped lows and highs cause engineers to create inverse mixes that are weak and dull. Because SCM Series monitors offer a flat, neutral frequency response, you can make more informed decisions and create better mixes faster.\u003c\/p\u003e\r\n\r\n\u003cp\u003eMost two-way speakers place the crossover frequency between 1.5 kHz and 2 kHz which often creates an unbalanced midrange, resulting in a lack of clarity. ATC SCM Series monitors feature a custom 3” driver that focuses on 380 Hz - 3.5 kHz, allowing you to monitor your midrange with more accuracy.\u003c\/p\u003e\r\n\r\n\u003ch3\u003ePERFECT FOR ANY HIGH-END AUDIO APPLICATION\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe ATC SCM Series offers high-performance in the most compact form possible. While SCM Series monitors are right at home sitting on the meter bridge in a recording studio, they’re equally at home in many other settings, such as post-production houses or rack-mounted in broadcast studios.\u003c\/p\u003e\r\n\r\n\r\n\r\n\r\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eDrivers: HF 25 mm soft dome, Mid 75 mm soft dome, LF 164 mm short-coil carbon paper cone\u003c\/li\u003e\r\n\u003cli\u003eAmplitude Linearity (±2 dB): 74 Hz - 17 kHz\u003c\/li\u003e\r\n\u003cli\u003eCut-off Frequencies (-6 dB, free-standing): 47 Hz - 22 kHz\u003c\/li\u003e\r\n\u003cli\u003eDispersion: ±80° Coherent Horizontal, ±10° Coherent Vertical\u003c\/li\u003e\r\n\u003cli\u003eMax Continuous SPL (1 meter): 109 dB\u003c\/li\u003e\r\n\u003cli\u003eAudio Input: Rear panel mounted female XLR (pin 2 +)\u003c\/li\u003e\r\n\u003cli\u003eInput Sensitivity: 1V rms (ref. full output)\u003c\/li\u003e\r\n\u003cli\u003eInput Sensitivity Trim: 0 dB to -6 dB\/1 V – 2 V (continuously variable via rear panel trimmer)\u003c\/li\u003e\r\n\u003cli\u003eInput Impedance: Balanced \u0026gt; 10 kΩ\u003c\/li\u003e\r\n\u003cli\u003eAmplifier Output Power: Bass 150 W RMS, Mid 60 W RMS, High 25 W RMS\u003c\/li\u003e\r\n\u003cli\u003eCrossover Frequencies: 380 Hz \u0026amp; 3.5 khz\u003c\/li\u003e\r\n\u003cli\u003eCrossover Filters: 4th order critically damped with phase compensations\u003c\/li\u003e\r\n\u003cli\u003eLow Frequency Boost: 0 dB to +3 dB at 40 Hz (continuously variable via rear panel trimmer)\u003c\/li\u003e\r\n\u003cli\u003eOverload Protection: Active FET momentary gain reduction\u003c\/li\u003e\r\n\u003cli\u003eDimensions (H x W x D): 264 x 430 x 369 mm (10.4˝ x 16.9˝ x 14.5˝);  Handles add an 39 mm\/1.5 ″ to depth.\u003c\/li\u003e\r\n\u003cli\u003eWeight: 30 kg \/ 66 lb (per cabinet)\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247322742921,"sku":"13076","price":8290.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-scm25a_13076_1_58b83f62-534a-44db-aaf6-83f63ca8dcaa.jpg?v=1784052457"},{"product_id":"atc-loudspeakers-sub-1-15-pro-single","title":"ATC Loudspeakers SCM0.1\/15ASL Active 15\" Subwoofer - Single","description":"\u003cp\u003eThe \u003cstrong\u003eATC Loudspeakers SCM0.1\/15ASL\u003c\/strong\u003e is an active, low-distortion subwoofer that combines a unique downward-firing design with cutting-edge drive technology for unparalleled low-end performance. Equipped with a massive 15-inch Super Linear bass driver and a class-leading 450 watt Class G amplifier, the SCM0.1\/15ASL delivers rich, powerful low-end up to 118 dB SPL. Stereo XLR inputs and variable gain and frequency controls make the SCM0.1\/15ASL the ultimate subwoofer for professional music and film audio productions.\u003c\/p\u003e\r\n\u003ch3\u003eSUPER LINEAR DRIVER\u003c\/h3\u003e\r\n\u003cp\u003eATC SCM0.1\/15ASL Pro subs are equipped with an unparalleled 15-inch Super Linear bass drivers for thunderous, earth-shattering low-end. Super Linear drivers utilize a proprietary underhung voice coil design for minimal distortion, even at high volume levels. Unlike traditional forward-firing subwoofers with uneven sound distribution, the SCM0.1\/15ASL features a modern downward-firing design for accurate, balanced low-end in any studio or post-production facility,\u003c\/p\u003e\r\n\u003ch3\u003eBUILT-IN BASS MANAGEMENT\u003c\/h3\u003e\r\n\u003cp\u003eATC’s founder Billy Woodman had a strict “no bass management” philosophy and believed that professional studio monitors should sound good right out of the box. That’s why the SCM0.1\/15ASL features intuitive, easy-to-use controls. Quickly dial in the perfect sound using an amp gain control, a low-pass filter with selectable frequencies of 180 Hz, 120 Hz, 90 Hz, 70 Hz, 50 Hz, and 2 kHz. The SCM0.1\/15ASL also features a dedicated contour control, which introduces a small boost at 100 Hz.\u003c\/p\u003e\r\n\u003ch3\u003eTHE PERFECT SUB FOR ATC MONITORS\u003c\/h3\u003e\r\n\u003cp\u003eWhile the SCM0.1\/15ASL is designed to work with any studio monitors, it is optimally engineered to compliment ATC studio monitors. ATC recommends leaving your studio monitors flat when paired with the SCM0.1\/15ASL, as bass management filtering artificially colors the main speaker sound and can even introduce phase problems.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDriver: LF 375 mm\u003c\/li\u003e\r\n\u003cli\u003eAmplitude Linearity (±2 dB): 30 Hz - 300 Hz\u003c\/li\u003e\r\n\u003cli\u003eCut-off Frequency (-6 dB, free-standing): 20 Hz\u003c\/li\u003e\r\n\u003cli\u003eMax. Continuous SPL (1 metre): 115dB\u003c\/li\u003e\r\n\u003cli\u003eInput Connectors: Male XLR\u003c\/li\u003e\r\n\u003cli\u003eInput Sensitivity: 1V\u003c\/li\u003e\r\n\u003cli\u003eInput Impedance: Balanced \u0026gt; 10 kΩ\u003c\/li\u003e\r\n\u003cli\u003eAmplifier Output: Bass 450 W\u003c\/li\u003e\r\n\u003cli\u003eFilters: Even Order Critically Damped\u003c\/li\u003e\r\n\u003cli\u003eOverload Protection: Active FET momentary gain reduction\u003c\/li\u003e\r\n\u003cli\u003ePanel Indicators: Power On indicator\u003c\/li\u003e\r\n\u003cli\u003eDimensions (HxWxD): 624 x 580 x 580 mm (24.6″ x 22.8″ x 22.8″)\u003c\/li\u003e\r\n\u003cli\u003eWeight: 60 kg (132 lb)\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247339454601,"sku":"403","price":7990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-loudspeakers-scm-15-sub-23_403_1.jpg?v=1784052511"},{"product_id":"atc-loudspeakers-scm300asl-single","title":"ATC Loudspeakers SCM300ASL - Single","description":"\u003cp\u003eBased on the same mid and HF drivers, and the same amplifier block as the ATC SCM200A Pro, the \u003cspan style=\"font-weight: bold;\"\u003eATC SCM300A\u003c\/span\u003e employs larger 375mm bass drivers and a larger 300 litre enclosure to deliver even higher maximum volume (121dB\/1m), with extended bass and increased transient headroom.\u003c\/p\u003e\n\u003cp\u003eThe new ATC SCM300 AT is a superb speaker producing prodigious bass output down to 25Hz. with legendary ATC dynamics and power.\u003cbr\u003e\u003cbr\u003eFeaturing a pair of ATC 375mm bass drivers, the legendary ‘Super Dome’ midrange driver and a 34mm soft dome tweeter.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247413608585,"sku":"15612","price":22750.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc_loudspeakers_scm300asl_pair_1.jpg?v=1784044921"},{"product_id":"atc-loudspeakers-p1-power-amp","title":"ATC Loudspeakers P1 Power Amp","description":"Capable of an output of 150 Watts of power into 8 Ohms or 200 Watts into 4 Ohms per channel, the \u003cspan style=\"font-weight: bold;\"\u003eATC P1\u003c\/span\u003e dual mono power amplifier features a Class A\/B design which allows for stability and impedance load control as well as a -95dB (≤0.002%) or better distortion figure.\u003cbr\u003e \u003cbr\u003e It can be bi-amp and tri-amp configured through the included linking capabilities and the balanced phono and XLR inputs. Each one of the P1s is hand-built in England, and is encased in a new chassis that features a brushed aluminum front plate measuring half an inch thick.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eFeatures\u003c\/span\u003e\u003cbr\u003e \u003cul\u003e\n\u003cli\u003e150W per channel\u003c\/li\u003e\n\u003cli\u003eClass A\/B operation\u003c\/li\u003e\n\u003cli\u003eHand built in the UK\u003c\/li\u003e\n\u003cli\u003eTrue dual mono design\u003c\/li\u003e\n\u003cli\u003eBalanced and unbalanced inputs\u003c\/li\u003e\n\u003cli\u003eAmplifier link output\u003c\/li\u003e\n\u003cli\u003eRemote control\u003c\/li\u003e\n\u003c\/ul\u003e \u003cspan style=\"font-weight: bold;\"\u003eSpecifications\u003c\/span\u003e\u003cbr\u003e \u003cul\u003e\n\u003cli\u003eInput sensitivity: 2V\u003c\/li\u003e\n\u003cli\u003eInput Impedance : 10kΩ\/leg\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 400kHz (-3dB)\u003c\/li\u003e\n\u003cli\u003eOutput Power into 8Ω: 150W\u003c\/li\u003e\n\u003cli\u003eSignal to noise ratio: \u0026gt;110dB (DIN)\u003c\/li\u003e\n\u003cli\u003eCrosstalk: \u0026gt;100dB\u003c\/li\u003e\n\u003cli\u003eTHD: \u0026gt;0.002%\/-95dB\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247482159241,"sku":"18439","price":2925.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc_p1.jpg?v=1784045140"},{"product_id":"atc-loudspeakers-scm25a-pro-single","title":"ATC Loudspeakers SCM25A Pro Compact Active 3-Way Monitor - Single","description":"Designed for positioning on a meter bridge, or rack-mountable for broadcast applications, the \u003cspan style=\"font-weight: bold;\"\u003eATC SCM25A Pro\u003c\/span\u003e offers very high-performance in the most compact possible form factor.\u003cbr\u003e\u003cbr\u003eThe SCM25A Pro incorporates ATC's proprietary short coil seven-inch carbon-paper woofer, a three-inch soft dome midrange driver and a one-inch silk dome tweeter in a ported enclosure that measures 10.4 inches (264 mm) (H) x 16.9 inches (430 mm) (W) x 16 inches (408 mm) (D). The integrated tri-amplifier generates 150 W RMS for the woofer, 50 W RMS for the midrange and 25 W RMS for the tweeter. The passively cooled amp pack also features FET limiting. The crossovers are all 4th order, critically damped with phase compensation.\u003cbr\u003e\u003cbr\u003eThe SCM25A Pro produces a wide, stable soundfield with very low coloration and offers low frequency extension to 42 Hz (-6dB).","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247487238281,"sku":"16674","price":4495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-scm25a_16674_1_f7cccf90-228e-40d6-a002-06260865b810.jpg?v=1784045158"},{"product_id":"atc-loudspeakers-scm-1-15-subwoofer-single-used","title":"ATC Loudspeakers SCM 1\/15 Subwoofer - Single (Used)","description":"The \u003cspan style=\"font-weight: bold;\"\u003eATC SCM0.1\/15ASL Sub\u003c\/span\u003e uses the incredible ATC invention, the SL driver. 375mm (15 inches) in diameter, it is the largest of the SL driver options and offers the lowest 3rd harmonic distortion of any large woofer we know, typically reducing it by 35dB. A massive built-in 1000W ATC high speed amplifier delivers over 118dB spl at 28Hz - an amazing feat. This sub is floor loaded to couple with almost any room properly (far better than any front loaded type sub). It also offers a nice user interface that addresses Billy Woodman’s philosophy of “no bass management”. The ATC sub has a dual XLR (L\/R) input, an amp gain control, a LP filter with user selectable frequencies of 2K, 180Hz, 120, 90, 70, 50Hz. There is also a “contour” control that enables a peak type filter (boost) into the amplifier at around 100Hz if you want to compensate for AC3 or source deficiencies.\u003cbr\u003e\u003cbr\u003eATC recommends no “bass management” or, no roll off for the main speakers when used with a sub. This bass management filtering artificially colors the main speaker sound and introduces filter\/phase problems. ATC’s thought is that bass management was largely created to protect woofers in tiny satellites, not to improve overall response or transition between sub and mains. Run the main speakers full range and the sub at the widest possible bandwidth, then lower the LP filter freq to the sub from there. This generates a nice result and creates a smooth transition between mains and subs.\u003cbr\u003e\u003cbr\u003eThe ATC sub package is flat to 28Hz and is very clean. True low distortion woofer output below 100Hz is a thing of beauty and we’ve heard it ONLY in the ATC. Do not expect to be “knocked down” with huge quantities of bass. Much of what we think is massive bass is really just loads of distortion at 200Hz to 300Hz! Sometimes this distortion can approach 40 to 50% of the total sub output! So word to the wise, do not buy this ATC sub for showing off to clients. It is a precision tool and engineer's window into the “below 100 Hz” world of a mix; a near perfect mate to ATC mains. If you are making judgments on bass content, we see no other way you can do it properly than with the ATC sub.\u003cbr\u003e\u003cbr\u003eA single ATC SCM 0.1\/15ASL will deliver output SPL of 118dB (1W\/1M). IF you need more output you must add units. A single 1-15 sub is 118dB SPL, 2 is 121dB SPL, 4 is 124dB SPL and 8 is insane!","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247500771465,"sku":"18821","price":3395.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/used_atc_loudspeakers_scm_1-15_subwoofer-single_a3976eb2-c541-4340-b37d-d307cdeec433.jpg?v=1784045201"},{"product_id":"atc-loudspeakers-scm25a-pro-pair-demo-deal","title":"ATC Loudspeakers SCM25A Pro - Pair (Demo Deal)","description":"\u003cp\u003eDesigned for positioning on a meter bridge, or rack-mountable for broadcast applications, the \u003cspan style=\"font-weight: bold;\"\u003eATC SCM25A Pro\u003c\/span\u003e offers very high-performance in the most compact possible form factor.\u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eThe SCM25A Pro incorporates ATC's proprietary short coil seven-inch carbon-paper woofer, a 3\" soft dome midrange driver and a one-inch silk dome tweeter in a ported enclosure that measures 10.4\" (264 mm) (H) x 16.9\" (430 mm) (W) x 16\" (408 mm) (D). The integrated tri-amplifier generates 150 W RMS for the woofer, 50 W RMS for the midrange and 25 W RMS for the tweeter.  The passively cooled amp pack also features FET limiting.  The crossovers are all 4th order, critically damped with phase compensation.\u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eThe SCM25A Pro produces a wide, stable soundfield with very low coloration and offers low frequency extension to 42 Hz (-6dB).\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247603892361,"sku":"29086","price":6990.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc_scm25a_pair_1.jpg?v=1784045597"},{"product_id":"atc-loudspeakers-scm25a-pro-pair-500-501-used","title":"ATC Loudspeakers SCM25A Pro Pair #500, 501 (Used)","description":"Designed for positioning on a meter bridge, or rack-mountable for broadcast applications, the \u003cspan style=\"font-weight: bold;\"\u003eATC SCM25A Pro\u003c\/span\u003e offers very high-performance in the most compact possible form factor.\u003cbr\u003e\u003cbr\u003eThe SCM25A Pro incorporates ATC's proprietary short coil seven-inch carbon-paper woofer, a three-inch soft dome midrange driver and a one-inch silk dome tweeter in a ported enclosure that measures 10.4 inches (264 mm) (H) x 16.9 inches (430 mm) (W) x 16 inches (408 mm) (D). The integrated tri-amplifier generates 150 W RMS for the woofer, 50 W RMS for the midrange and 25 W RMS for the tweeter. The passively cooled amp pack also features FET limiting. The crossovers are all 4th order, critically damped with phase compensation.\u003cbr\u003e\u003cbr\u003eThe SCM25A Pro produces a wide, stable soundfield with very low coloration and offers low frequency extension to 42 Hz (-6dB).","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247636037769,"sku":"37141","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/used_37141_1_b2f012bd-a5b5-4746-aaff-896783de3e46.jpg?v=1784045697"},{"product_id":"atc-scm50asl-pair-43424343-used","title":"ATC SCM50ASL Pair #4342\/4343 (Used)","description":"Nicely maintained speaker pair, minor cosmetic issues.\u003cbr\u003e\u003cbr\u003eFeatures\u003cbr\u003e \u003cul\u003e\n\u003cli\u003e25mm soft dome tweeter.\u003c\/li\u003e\n\u003cli\u003eFull SL spec 234mm bass driver.\u003c\/li\u003e\n\u003cli\u003eATC 75mm Super Dome mid driver.\u003c\/li\u003e\n\u003cli\u003eOn board ATC grounded plane 350W Tri-amplifier.\u003c\/li\u003e\n\u003cli\u003eLF contour control.\u003c\/li\u003e\n\u003cli\u003eClip indication.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003eThe \u003cstrong\u003eATC SCM50ASL\u003c\/strong\u003e Pro is an active 3-way system suitable for reference monitoring in medium sized rooms, with a 234mm Super Linear bass driver and ATC's unique SM75-150S mid range soft dome driver.\u003cbr\u003e\u003cbr\u003eThe active design ensures optimum matching of six MOS-FET amp blocks to the drivers, providing plenty of transient headroom and maximum SPLs of up to 112dB.\u003cbr\u003e\u003cbr\u003eAn LF contour control provides five bass boost settings, and a flat reference response.","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247639707785,"sku":"35127","price":7650.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-scm50asl-pair-43424343-used-5898939.jpg?v=1784045709"},{"product_id":"atc-loudspeakers-scm20psl-mk2-pair","title":"ATC Loudspeakers SCM20P MK2 2-Way Passive Monitor - Pair","description":"\u003cp\u003eThe \u003cstrong\u003eATC SCM20P Pro\u003c\/strong\u003e is a passive two-way studio monitor that delivers outstanding bass response and dynamic range in a compact package. Equipped with a cutting-edge 6.5-inch Super Linear mid\/bass driver and a one-inch dual-suspension S-spec tweeter, SCM20P monitors deliver balanced, neutral sound with a wide sweet spot.\u003c\/p\u003e\r\n\u003ch3\u003eS-SPEC TWEETER\u003c\/h3\u003e\r\n\u003cp\u003eThe ATC SCM20P Pro features a 1-inch soft dome S-spec tweeter with an innovative dual-suspension design for pristine highs. S-spec tweeters combine an exceptionally powerful motor assembly with a lightweight coil former for minimal distortion and an extended frequency range up to 25 kHz. Unlike conventional tweeters, S-spec tweeters offer far greater control of the voice coil and dome motion, especially at higher sound pressure levels. By reducing internal distortion, S-spec tweeters deliver improved clarity and definition, and significantly reduce listener fatigue. And with zero ferro fluid, these tweeters are guaranteed to last a lifetime.\u003c\/p\u003e\r\n\u003ch3\u003eSUPER LINEAR DRIVER\u003c\/h3\u003e\r\n\u003cp\u003eATC SCM20P Pro studio monitors are equipped with a state-of-the-art 6.5-inch Super Linear mid\/bass driver for tight, powerful low end. With a unique underhung voice coil design, Super Linear drivers deliver extremely low distortion, even at high SPLs. SCM20PSL Pro studio monitors feature a 150mm bass cone with a grafted 75mm soft dome to for an extremely wide dynamic range, making them an excellent choice for post-production projects.\u003c\/p\u003e\r\n\u003ch3\u003eSUGGESTED AMPLIFICATION\u003c\/h3\u003e\r\n\u003cp\u003eSCM20P Pro studio monitors feature a high-performance passive crossover with 250 VDC metalized polypropylene capacitors and hand-wound air-cored type inductors for smooth transitions across all frequency ranges. While SCM20PSL Pro studio monitors are designed to work with any traditional power amp, they perform best when paired with ATC’s 300 W per-channel P2 Pro dual-mono power amplifier. With class-leading power output and outstanding sonic resolution, ATC power amps deliver unparalleled performance.\u003c\/p\u003e\r\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMax Continuous SPL: 108 dB\u003c\/li\u003e\r\n\u003cli\u003eCrossover: 2.8 kHz\/ Internal, 2nd order,passive\u003c\/li\u003e\r\n\u003cli\u003eWoofer: ATC 6.5\"SL\u003c\/li\u003e\r\n\u003cli\u003eTweeter: 1\" dome\u003c\/li\u003e\r\n\u003cli\u003eH\/W\/D in inches: 17.3\/9.9\/11.9\u003c\/li\u003e\r\n\u003cli\u003eWeight: 44lbs ea.\u003c\/li\u003e\r\n\u003cli\u003eShipping Weight: 50 lb each\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247683289225,"sku":"38124","price":4990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-scm20psl_38124_1_4a5d9431-496d-430d-8637-07f229e8f3a5.jpg?v=1784045832"},{"product_id":"atc-loudspeakers-scm20a-pro-mk2-pair","title":"ATC Loudspeakers SCM20A Pro MK2 2-Way Active Monitor - Pair","description":"\u003cp\u003eThe \u003cstrong\u003eATC SCM20A Pro\u003c\/strong\u003e is a active two-way studio monitor that combines outstanding bass response and dynamic range in a compact package. Equipped with a groundbreaking 6.5-inch Super Linear mid\/bass driver, a 1-inch dual-suspension S-spec tweeter and an all-discrete MOSFET class A\/B amplifier, SCM20ASL monitors deliver balanced, neutral sound with astonishgly low distortion.\u003c\/p\u003e\r\n\u003ch3\u003eS-SPEC TWEETER\u003c\/h3\u003e\r\n\u003cp\u003eThe ATC SCM20ASL Pro features a 1-inch soft dome S-spec tweeter with an innovative dual suspension design for pristine high-end. S-spec tweeters combine an exceptionally powerful motor assembly with a lightweight coil former for an extended frequency range up to 25 kHz. Unlike conventional tweeters, S-spec tweeters offer far greater control of the voice coil and dome motion—especially at higher sound pressure levels. By reducing internal distortion, S-spec tweeters deliver improved clarity and definition, and significantly reduce listener fatigue. And with zero ferro fluid, these tweeters are guaranteed to last a lifetime.\u003c\/p\u003e\r\n\u003ch3\u003eSUPER LINEAR DRIVER\u003c\/h3\u003e\r\n\u003cp\u003eATC SCM20A Pro studio monitors are equipped with a state-of-the-art 6.5-inch Super Linear mid\/bass driver for tight, powerful low end. With a unique underhung voice coil design, Super Linear drivers produce extremely low distortion, even at high SPLs. SCM20A Pro studio monitors feature a 150mm bass cone with a grafted 75 mm soft dome to for an extremely wide dynamic range, making them an excellent choice for post production projects.\u003c\/p\u003e\r\n\u003ch3\u003eIMPRESSIVE AMPLIFICATION\u003c\/h3\u003e\r\n\u003cp\u003eATC SCM20A Pro studio monitors use an innovative bi-amplified design to provide 300 total watts of power for crystal-clear distortion-free sound. With 250W powering the Super Linear mid\/bass driver and an additional 50W for the S-spec tweeter, SCM20A Pro studio monitors offer impressive headroom and class-leading transparency at any volume level.\u003c\/p\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247683354761,"sku":"39584","price":6990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-scm20asl_39584_1.jpg?v=1784045832"},{"product_id":"atc-scm100asl-pair-3535-3536-used","title":"ATC SCM100ASL Pair #3535\/3536 (Used)","description":"\u003cstrong\u003eATC SCM100ASL\u003c\/strong\u003e Pro is an active 3-way monitor system suitable for larger rooms, based around the same tweeter, midrange and amp configuration as the SCM50ASL Pro, but using a 314mm bass driver in a larger enclosure.\u003cbr\u003e\u003cbr\u003eMaximum continuous SPLs of up to 115dB\/1m are possible. 4th order active crossovers produce a highly linear amplitude response for both direct and ambient fields, contributing to exceptional stereo imaging.\u003cbr\u003e\u003cbr\u003eThe active design ensures optimum matching of six MOS-FET amp blocks to the drivers, providing plenty of transient headroom and maximum SPLs of up to 112dB.\u003cbr\u003e\u003cbr\u003eAn LF contour control provides five bass boost settings, and a flat reference response.","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247729623177,"sku":"42799","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/used_42799_1.jpg?v=1784045965"},{"product_id":"atc-scm20sl-pair-04429-04430-used","title":"ATC SCM20SL Pair #04429\/04430 (Used)","description":"Designed to fit within the company's highly-regarded line of speakers, the ATC \"Passive 20\" features the same woofer and tweeter as the active (SCM20ASL) version of the speaker. The SCM20SL passives are housed in a conventional \"pro-black\" box for easy placement on any meter bridge. \u003cbr\u003e\u003cbr\u003eATC recommends amplifiers with at least 200W per channel of power. The Passive 20 loudspeaker enables ATC speaker fans to own a high performance monitor at half the price of the actives. \u003cbr\u003e\u003cbr\u003eThe SCM20SL Passive low-frequency section is a hybrid design incorporating a 150mm bass cone with a grafted 75mm soft dome for mid-range assist. The woofer magnet assembly utilizes ATC's unique \"SL\" technology to greatly reduce third harmonic distortion and reveal mistakes and details. All ATC drivers are manufactured in-house to exacting tolerances and are legendary for their many design innovations. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eMax Continuous SPL: 108dB \u003c\/li\u003e\n\u003cli\u003eCrossover: 2.8kHz\/ Internal, 2nd order, \u003c\/li\u003e\n\u003cli\u003epassive \u003c\/li\u003e\n\u003cli\u003eWoofer: ATC 6.5\"SL \u003c\/li\u003e\n\u003cli\u003eTweeter: 1\" dome \u003c\/li\u003e\n\u003cli\u003eH\/W\/D in inches: 17.3\/9.9\/11.9 \u003c\/li\u003e\n\u003cli\u003eWeight: 44lbs ea. \u003c\/li\u003e\n\u003cli\u003eShipping Weight: 50lbs ea \u003c\/li\u003e\n\u003cli\u003eCabinet: Wood, Black Ash\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247733129353,"sku":"42497","price":2150.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc_scm20sl_pair__04429_04430__used__4197639.jpg?v=1784045975"},{"product_id":"atc-loudspeakers-scm45a-pro-pair","title":"ATC Loudspeakers SCM45A Pro Compact Active 3-Way Monitor - Pair","description":"High performance 3-way compact active loudspeaker","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247741550729,"sku":"43841","price":13990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc_scm45a_pair_c8856d13-a4ac-4875-8436-7bda60fc0f4b.jpg?v=1784046002"},{"product_id":"atc-loudspeakers-scm20asl-pro-mk2-pair-demo-deal","title":"ATC Loudspeakers SCM20ASL Pro MK2 - Pair (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eATC Loudspeakers SCM20ASL Pro MK2\u003c\/strong\u003e is ideally suited for critical near-field listening applications in all control rooms, LCR surround monitoring in small-to-medium control rooms and surround channels in medium-to-large control rooms.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eProprietary ATC 150mm\/6” Super Linear Mid\/Bass Driver\u003c\/li\u003e\r\n\u003cli\u003eProprietary ATC 25mm\/1” Dual Suspension ‘S-Spec’ Tweeter\u003c\/li\u003e\r\n\u003cli\u003eDiscrete MOSFET class A\/B bi-amp pack. LF 200W \u0026amp; HF 50W\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications:\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDrivers: LF 6.5”\/150mm Super Linear, HF 1”\/25mm Dual-Suspension ‘S-Spec’ Tweeter\u003c\/li\u003e\r\n\u003cli\u003eAmplitude linearity : 80Hz – 20kHz (+\/-2dB)\u003c\/li\u003e\r\n\u003cli\u003eCut-off frequencies : 55Hz – 25kHz (-6dB freestanding)\u003c\/li\u003e\r\n\u003cli\u003eDispersion : +\/-80° coherent horizontal, +\/-10° coherent vertical\u003c\/li\u003e\r\n\u003cli\u003eMaximum continuous : SPL 108dB (per pair @ 1m)\u003c\/li\u003e\r\n\u003cli\u003eAudio input : Rear panel mounted female XLR (pin 2 +ve)\u003c\/li\u003e\r\n\u003cli\u003eInput sensitivity : 1V\/2V RMS or +2.2\/+8.2dBu via switch (ref. bass full output)\u003c\/li\u003e\r\n\u003cli\u003eInput sensitivity trim : 0dB to -6dB (via rear panel pot)\u003c\/li\u003e\r\n\u003cli\u003eTotal input sensitivity range : 1V\/+2.2dBu to 4V\/+14.2dBu\u003c\/li\u003e\r\n\u003cli\u003eInput impedance : 10kΩ per leg\u003c\/li\u003e\r\n\u003cli\u003eAmplifier output power : Bass 200W continuous, HF 50W continuous (1%THD)\u003c\/li\u003e\r\n\u003cli\u003eCrossover frequency : 2.1kHz\u003c\/li\u003e\r\n\u003cli\u003eCrossover filters : 2nd order\/ 12dB\/oct critically damped with phase compensation\u003c\/li\u003e\r\n\u003cli\u003eLow frequency shelf cut\/boost : 80Hz, -2dB to +3dB in 1dB steps (via rear panel rotary switch)\u003c\/li\u003e\r\n\u003cli\u003eOverload protection : Active FET momentary gain reduction (inc. front panel mounted ‘limit’ LED)\u003c\/li\u003e\r\n\u003cli\u003eAmplifier thermal trip circuit\u003c\/li\u003e\r\n\u003cli\u003eCabinet Dimensions (HxWxD) : 450x250x392mm (17.7″x8.8″x15.4″)\u003c\/li\u003e\r\n\u003cli\u003eWeight : 28kg\/61.6lbs (per cabinet)\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247764390025,"sku":"47830","price":6209.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc_scm20slm2_1_1.jpg?v=1784046070"},{"product_id":"atc-loudspeakers-scm25a-pro-pair-332-333-used","title":"ATC Loudspeakers SCM25A Pro Pair #332\/333 (Used)","description":"Designed for positioning on a meter bridge, or rack-mountable for broadcast applications, the \u003cstrong\u003eATC SCM25A Pro\u003c\/strong\u003e offers very high-performance in the most compact possible form factor.\u003cbr\u003e\u003cbr\u003eThe SCM25A Pro incorporates ATC's proprietary short coil seven-inch carbon-paper woofer, a three-inch soft dome midrange driver and a one-inch silk dome tweeter in a ported enclosure that measures 10.4 inches (264 mm) (H) x 16.9 inches (430 mm) (W) x 16 inches (408 mm) (D). The integrated tri-amplifier generates 150 W RMS for the woofer, 50 W RMS for the midrange and 25 W RMS for the tweeter. The passively cooled amp pack also features FET limiting. The crossovers are all 4th order, critically damped with phase compensation.\u003cbr\u003e\u003cbr\u003eThe SCM25A Pro produces a wide, stable soundfield with very low coloration and offers low frequency extension to 42 Hz (-6dB).\u003cp\u003e\u003cem\u003e\u003cstrong style=\"color: #d89126;\"\u003ePlease note: Stock photo used. Available items are sure to be in similar condition, but may not be the exact item pictured.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247766782089,"sku":"44865","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc_loudspeakers_scm25a_pro_pair__332_333__used__4771649_b3ac8f4c-90d4-4e0a-960a-557444ac519a.jpg?v=1784046077"},{"product_id":"atc-loudspeakers-scm-1-15-subwoofer-single-380-used","title":"ATC Loudspeakers SCM 1\/15 Subwoofer - Single #380 (Used)","description":"Beautifully maintained speaker.","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247769600137,"sku":"44578","price":4150.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc_loudspeakers_scm_1_15_subwoofer_-_single__380__used__4556010.jpg?v=1784046087"},{"product_id":"atc-loudspeakers-scm45a-pro-pair-demo-deal","title":"ATC Loudspeakers SCM45A Pro - Pair (Demo Deal)","description":"High performance 3-way compact active loudspeaker","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247828517001,"sku":"51089","price":12495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc_scm45a_pair_1.jpg?v=1784046280"},{"product_id":"atc-loudspeakers-p1-pro-amplifier","title":"ATC Loudspeakers P1 Pro 2x 150 Watt Amplifier","description":"\u003cp\u003eThe \u003cstrong\u003eATC P1 Pro\u003c\/strong\u003e is a high-quality class A\/B power amplifier designed to power ATC passive monitors. The ATC P1 Pro features 150W per channel with a true dual mono design with the power supply signal being totally separated from the return paths ensuring minimum crosstalk and maximum separation. Another advantage of such a design is that intermodulation between channels is reduced to the minimum at all frequencies and that power on one channel doesn’t affect the other. With balanced XLR inputs and unbalanced RCA inputs ensures that the ATC P1 Pro fits perfectly in your system. In addition, each channel features two phono input sockets and a “Link” input phono for connecting two amps together when using a sub for example. Outputs are proprietary ATC connectors with red and black terminals to ensure correct connections. The P1 Pro fits into a 19” rack and includes a remote trigger for send the unit in standby. Several LEDS indicate the different status of the amp with a green light indicating that the amplifier is active and a red light indicating standby mode. Additional LEDs include “Clip”, “Error Left” and “Error Right” are added as indication of the incoming levels. A Protect mode is also included whereby the amplifier will shut down. This feature is designed to protect the amp and the monitors.\u003c\/p\u003e\r\n\u003ch3\u003eSpecs:\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eOutput Power: 150W (8 Ω, 1kHz, continuous. avg., both channels driven)\u003c\/li\u003e\r\n\u003cli\u003eInput Sensitivity: 2V RMS (ref. 150W out)\u003c\/li\u003e\r\n\u003cli\u003eInput Impedance: 10kΩ\/leg\u003c\/li\u003e\r\n\u003cli\u003eFrequency Response: 400kHz (-3dB)\u003c\/li\u003e\r\n\u003cli\u003eSignal to noise ratio: \u0026gt;115dB (IEC ‘A’)\u003c\/li\u003e\r\n\u003cli\u003eCrosstalk: \u0026gt;100dB (10Hz – 20kHz)\u003c\/li\u003e\r\n\u003cli\u003eTHD: \u0026gt;0.002%\/-95dB (8 Ω, 1kHz, -1dB below full Power)\u003c\/li\u003e\r\n\u003cli\u003eDamping Factor: \u0026gt;400 (8 Ω)\u003c\/li\u003e\r\n\u003cli\u003eDimensions (HxWxD): 145x483x366mm (3U tall with feet removed)\u003c\/li\u003e\r\n\u003cli\u003eWeight: 18kg\/39.6lbs\u003c\/li\u003e\r\n\u003cli\u003eClass A\/B operation\u003c\/li\u003e\r\n\u003cli\u003eHand built in the UK\u003c\/li\u003e\r\n\u003cli\u003eTrue dual mono design\u003c\/li\u003e\r\n\u003cli\u003eBalanced and unbalanced inputs\u003c\/li\u003e\r\n\u003cli\u003eAmplifier link output\u003c\/li\u003e\r\n\u003cli\u003e3U 19″ rack mount chassis\u003c\/li\u003e\r\n\u003cli\u003eFront panel “standby” button\u003c\/li\u003e\r\n\u003cli\u003e6 year warranty\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247904047241,"sku":"38126","price":3999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-p1-pro-1_8e712ad1-b03c-40ec-989d-50c680d2150a.jpg?v=1784046514"},{"product_id":"atc-loudspeakers-p2-pro-amplifier","title":"ATC Loudspeakers P2 Pro 2x 300 Watt Amplifier","description":"\u003cp\u003eThe \u003cstrong\u003eATC Loudspeakers P2 Pro Amplifier\u003c\/strong\u003e is true dual-mono power amplifier delivering 300 W per channel with minimal crosstalk.\u003c\/p\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247904112777,"sku":"38127","price":4999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-loudspeakers-p2-pro-300-watt-23_38127_1_2_5eedaa56-d61f-40a6-9cf1-ff66ba241f04.jpg?v=1784046514"},{"product_id":"atc-loudspeakers-scm20asl-pro-mk2-and-subwoofer-pros-studio-sub-12","title":"ATC Loudspeakers SCM20ASL Pro MK2 and Subwoofer Pros Studio Sub 12","description":"\u003cp\u003eThe \u003cstrong\u003eATC Loudspeakers SCM20ASL Pro MK2\u003c\/strong\u003e is ideally suited for critical near-field listening applications in all control rooms, LCR surround monitoring in small-to-medium control rooms and surround channels in medium-to-large control rooms.\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eProprietary ATC 150mm\/6” Super Linear Mid\/Bass Driver\u003c\/li\u003e\r\n\u003cli\u003eProprietary ATC 25mm\/1” Dual Suspension ‘S-Spec’ Tweeter\u003c\/li\u003e\r\n\u003cli\u003eDiscrete MOSFET class A\/B bi-amp pack. LF 200W \u0026amp; HF 50W\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eDrivers: LF 6.5”\/150mm Super Linear, HF 1”\/25mm Dual-Suspension ‘S-Spec’ Tweeter\u003c\/li\u003e\r\n\u003cli\u003eAmplitude linearity : 80Hz – 20kHz (+\/-2dB)\u003c\/li\u003e\r\n\u003cli\u003eCut-off frequencies : 55Hz – 25kHz (-6dB freestanding)\u003c\/li\u003e\r\n\u003cli\u003eDispersion : +\/-80° coherent horizontal, +\/-10° coherent vertical\u003c\/li\u003e\r\n\u003cli\u003eMaximum continuous : SPL 108dB (per pair @ 1m)\u003c\/li\u003e\r\n\u003cli\u003eAudio input : Rear panel mounted female XLR (pin 2 +ve)\u003c\/li\u003e\r\n\u003cli\u003eInput sensitivity : 1V\/2V RMS or +2.2\/+8.2dBu via switch (ref. bass full output)\u003c\/li\u003e\r\n\u003cli\u003eInput sensitivity trim : 0dB to -6dB (via rear panel pot)\u003c\/li\u003e\r\n\u003cli\u003eTotal input sensitivity range : 1V\/+2.2dBu to 4V\/+14.2dBu\u003c\/li\u003e\r\n\u003cli\u003eInput impedance : 10kΩ per leg\u003c\/li\u003e\r\n\u003cli\u003eAmplifier output power : Bass 200W continuous, HF 50W continuous (1%THD)\u003c\/li\u003e\r\n\u003cli\u003eCrossover frequency : 2.1kHz\u003c\/li\u003e\r\n\u003cli\u003eCrossover filters : 2nd order\/ 12dB\/oct critically damped with phase compensation\u003c\/li\u003e\r\n\u003cli\u003eLow frequency shelf cut\/boost : 80Hz, -2dB to +3dB in 1dB steps (via rear panel rotary switch)\u003c\/li\u003e\r\n\u003cli\u003eOverload protection : Active FET momentary gain reduction (inc. front panel mounted ‘limit’ LED)\u003c\/li\u003e\r\n\u003cli\u003eAmplifier thermal trip circuit\u003c\/li\u003e\r\n\u003cli\u003eCabinet Dimensions (HxWxD) : 450x250x392mm (17.7″x8.8″x15.4″)\u003c\/li\u003e\r\n\u003cli\u003eWeight : 28kg\/61.6lbs (per cabinet)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003ch3\u003eSubwoofer Pros Studio 12\u003c\/h3\u003e\r\n\r\n\u003cp\u003eSubwoofer Pros provide subwoofers with best-in-class bass response and functionality for mission-critical recording and mixing environments. Subwoofer Pros’ first two products, STUDIO 12 and STUDIO 18 use a 400W integrated amplifier to deliver precise linear performance down to 8Hz at SPLs of 105dB and 113dB, respectively. A comprehensive set of inputs, outputs, and bass management protocols allow both subs to optimally integrate with an enormous range of existing professional monitoring setups.\u003c\/p\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47247925936265,"sku":"55760","price":7269.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-scm20-studio-sub-12-bundle_55760_1.jpg?v=1784046591"},{"product_id":"atc-loudspeakers-scm25a-pro-monitor-pair-721720-used","title":"ATC Loudspeakers SCM25A Pro Monitor Pair #721\/720 (Used)","description":"Designed for positioning on a meter bridge, or rack-mountable for broadcast applications, the \u003cstrong\u003eATC SCM25A Pro\u003c\/strong\u003e offers very high-performance in the most compact possible form factor.\u003cbr\u003eThe SCM25A Pro incorporates ATC's proprietary short coil seven-inch carbon-paper woofer, a three-inch soft dome midrange driver and a one-inch silk dome tweeter in a ported enclosure that measures 10.4 inches (264 mm) (H) x 16.9 inches (430 mm) (W) x 16 inches (408 mm) (D). The integrated tri-amplifier generates 150 W RMS for the woofer, 50 W RMS for the midrange and 25 W RMS for the tweeter. The passively cooled amp pack also features FET limiting. The crossovers are all 4th order, critically damped with phase compensation.\u003cbr\u003eThe SCM25A Pro produces a wide, stable soundfield with very low coloration and offers low frequency extension to 42 Hz (-6dB).\u003cp\u003e\u003cem\u003e\u003cstrong style=\"color: #d89126;\"\u003ePlease note:\u003c\/strong\u003e Stock photo used. Available items are sure to be in similar condition, but may not be the exact item pictured.\u003c\/em\u003e\u003c\/p\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47248163602569,"sku":"57446","price":3995.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-loudspeakers-scm25a-pro-monitor-pair-721720-used-4771649_d10a21ce-4b93-434e-ab12-e2f2563226f9.jpg?v=1784046997"},{"product_id":"atc-scm50asl-active-monitor-pair-43514352-used","title":"ATC SCM50ASL Active Monitor Pair #4351\/4352 (Used)","description":"The \u003cstrong\u003eATC SCM50ASL\u003c\/strong\u003e Pro is an active 3-way system suitable for reference monitoring in medium sized rooms, with a 234mm Super Linear bass driver and ATC's unique SM75-150S mid range soft dome driver.\u003cbr\u003e\u003cbr\u003eThe active design ensures optimum matching of six MOS-FET amp blocks to the drivers, providing plenty of transient headroom and maximum SPLs of up to 112dB.\u003cbr\u003e\u003cbr\u003eAn LF contour control provides five bass boost settings, and a flat reference response.\u003cbr\u003e\u003cbr\u003e\u003cp\u003e\u003cem\u003e\u003cstrong style=\"color: #d89126;\"\u003ePlease note:\u003c\/strong\u003e Stock photo used. Available items are sure to be in similar condition, but may not be the exact item pictured.\u003c\/em\u003e\u003c\/p\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47248189718665,"sku":"62004","price":7650.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-scm50asl-active-monitor-pair-43514352-used-6633797_65a40d3c-059c-4cdc-861f-9384c07f9c7b.jpg?v=1784047095"},{"product_id":"atc-loudspeakers-12p1pro-bundle","title":"ATC Loudspeakers 12P1PRO Bundle","description":"\u003cp\u003eAs an all-new design, the ATC Loudspeakers SCM12 Pro's acclaimed performance at a lower price point without compromising component quality and achieves this in a more compact, installation-friendly footprint ideally suited to nearfield monitoring as well as multichannel music and post-production applications. The \u003cstrong\u003eATC Loudspeakers 12P1PRO Bundle\u003c\/strong\u003e includes one pair of SCM12 Pro Speakers and one P1 Pro Dual-Mono Power Amplifier.\u003c\/p\u003e  \u003chr\u003e   \u003cp\u003e\u003cem\u003e“Anyone who has been waiting for an ATC nearfield with a smaller footprint, that is more easily installed, or that is more affordable, yet still delivers undiminished ATC performance, then the SCM12 Pro could be for them.”\u003c\/em\u003e says ATC Technical Sales Manager Ben Lilly, before adding: \u003cem\u003e“ATC R\u0026amp;D Manager Richard Newman has poured the same knowhow, time, and passion into this new model that has made the rest of the professional product line so successful. Users will find that productions completed using the SCM12 Pro will translate beautifully to other systems and that their incredibly low distortion makes listening to them a pleasure — even after long hours in the studio. At under £1,150.00 per pair, they may prove ideal for those seeking to upgrade ageing, hard-to-repair passive studio monitors.”\u003c\/em\u003e\u003c\/p\u003e  \u003chr\u003e   \u003ch3\u003eSCM12\u003c\/h3\u003e  \u003cp\u003eThough the SCM12 Pro is the most affordable model in the professional range of loudspeakers, the monitor makes use of the ATC’s celebrated drive units for both the mid\/bass and tweeter, both being meticulously hand built at the UK facility.\u003c\/p\u003e  \u003cp\u003eThe tweeter is a 25mm\/one-inch soft-dome designed around ATC’s unique dual-suspension technology. Unlike conventional tweeters, this precision part employs two suspensions, offering far greater control of the voice coil and dome motion — especially at higher sound pressure levels. The result is an extended high-frequency response with much greater clarity and definition due to the reduction in disturbing an-harmonic distortion. Listener fatigue is also greatly reduced, resulting in users being able to work for longer periods with greater accuracy.\u003c\/p\u003e  \u003cp\u003eAt the lower end of the frequency spectrum, mid\/bass reproduction is handled by ATC’s 150mm\/six-inch proprietary CLD drive unit. Using a 45mm\/1.75-inch diameter voice coil, and employing an FEA (Finite Element Analysis) optimised high-energy symmetric gap motor system, the driver is capable of tremendous dynamic range with minimal power compression. Cone construction is courtesy of another proprietary ATC technology that represents another advance in driver performance — namely, Constrained Layer Damping (CLD), a process that uses multiple laminated fabric cones to form a stiff, light, and tremendously well-damped structure. Speaking acoustically, this construction creates a smoother on- and off-axis frequency response and also a reduction in distortion leading to a more lifelike reproduction of source material. Meaningfully, judgements and decisions can be made more quickly, more accurately, and for longer periods of time by busy working audio professionals.\u003c\/p\u003e  \u003cp\u003ePut it another way: by employing exceptional drive units, the passive crossover can, by design, use the minimum number of components in a simple, second-order implementation. Indeed, the capacitors are all 250Vdc metalized polypropylene and all the inductors are air-cored types for minimal signal distortion. Additionally, all of the inductors are wound in house with very high-purity copper while large-gauge wire is used for the bass components to minimize signal losses.\u003c\/p\u003e  \u003cp\u003eLooking beyond the release of the superb-sounding SCM12 Pro, an install-specific sibling, the SCM12i, will be available as of Q1 2017. This model will feature threaded mounting points to mate with widely-available wall and ceiling brackets from K\u0026amp;M and Adaptive Technologies to simplify installation — incredibly useful in complex multichannel systems, such as those required by Auro 3-D, Dolby ATMOS, or DTS:X.\u003c\/p\u003e  \u003cp\u003eDiscerning audio professionals always appreciate that exceptional passive monitors require exceptional amplification; as far as the SCM12 Pro is concerned, the best possible results will be achieved when it is partnered with ATC’s own range of stereo power amplifiers. As such, the 150 W per-channel P1 Pro dual-mono power amplifier is the perfect partner — both in terms of power output and its outstanding resolution, resulting from technology originally developed for ATC’s high-end active monitoring systems. So customers can comfortably make the upgrade to an all-ATC monitoring and amplification system, an attractive package price will be offered for purchasing the two products simultaneously.\u003c\/p\u003e  \u003cp\u003eSimple, well-engineered products almost always trump feature-rich, cost-engineered alternatives, and ATC’s SCM12 Pro has been duly designed with that philosophy very much intact. Its neutral fidelity makes it a very versatile proposition, one which — when backed up with the company’s industry-leading six-year warranty — makes for a high-value, longterm investment for anyone looking to upgrade their monitoring system. So now is the time to consider EQ’ing, balancing, and editing faster, with more consistent results and reduced listening fatigue using the latest nearfield monitoring marvel from ATC.\u003c\/p\u003e     \u003ch3\u003eSPECIFICATIONS:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eDrivers: HF ATC 1˝\/25 mm dual suspension Soft Dome (SH25-76 6 Ohm) \/ LF ATC 6˝\/150 mm Constrained Layer Damping (CLD) (SB50-150CLD 8 Ohm)\u003c\/li\u003e \u003cli\u003eAmplitude Linearity: 80 Hz – 16 kHz (±2 dB)\u003c\/li\u003e \u003cli\u003eCut Off Frequencies: 56 Hz – 22 kHz (-6 dB freestanding)\u003c\/li\u003e \u003cli\u003eDispersion: ±80° Coherent Horizontal, ±10° Coherent Vertical\u003c\/li\u003e \u003cli\u003eMaximum Continuous SPL: 108dB (per pair @ 1m)\u003c\/li\u003e \u003cli\u003eCrossover Frequency: 2.2 kHz\u003c\/li\u003e \u003cli\u003eRecommended Power Amplifier: 75 to 300 Watts\u003c\/li\u003e \u003cli\u003eNominal Impedance: 8 Ohm\u003c\/li\u003e \u003cli\u003eConnectors: Binding Posts\/4mm Plugs, bi-wire\u003c\/li\u003e \u003cli\u003eCabinet Dimensions (HxWxD): 400 x 238 x 235 mm\/15.7˝ x 9.4˝ x9.3˝\u003c\/li\u003e \u003cli\u003eWeight: 11 kg\/24 lbs (per cabinet)\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eP1 Pro\u003c\/h3\u003e  \u003cp\u003eThe ATC P1 Pro is a high-quality class A\/B power amplifier designed to power ATC passive monitors. The ATC P1 Pro features 150W per channel with a true dual mono design with the power supply signal being totally separated from the return paths ensuring minimum crosstalk and maximum separation. Another advantage of such a design is that intermodulation between channels is reduced to the minimum at all frequencies and that power on one channel doesn’t affect the other. With balanced XLR inputs and unbalanced RCA inputs ensures that the ATC P1 Pro fits perfectly in your system. In addition, each channel features two phono input sockets and a “Link” input phono for connecting two amps together when using a sub for example. Outputs are proprietary ATC connectors with red and black terminals to ensure correct connections. The P1 Pro fits into a 19” rack and includes a remote trigger for send the unit in standby. Several LEDS indicate the different status of the amp with a green light indicating that the amplifier is active and a red light indicating standby mode. Additional LEDs include “Clip”, “Error Left” and “Error Right” are added as indication of the incoming levels. A Protect mode is also included whereby the amplifier will shut down. This feature is designed to protect the amp and the monitors.\u003c\/p\u003e  \u003ch3\u003eFEATURES:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003e150 W per channel\u003c\/li\u003e \u003cli\u003eClass A\/B operation\u003c\/li\u003e \u003cli\u003eHand built in the UK\u003c\/li\u003e \u003cli\u003eTrue dual mono design\u003c\/li\u003e \u003cli\u003eBalanced and unbalanced inputs\u003c\/li\u003e \u003cli\u003eAmplifier link output\u003c\/li\u003e \u003cli\u003e19″ rack mountable\u003c\/li\u003e \u003cli\u003eFront “standby” button\u003c\/li\u003e \u003cli\u003e6 year warranty\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eSPECIFICATIONS:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eOutput Power into 8 Ω: 150 W\u003c\/li\u003e \u003cli\u003eInput Sensitivity: 2 V RMS\u003c\/li\u003e \u003cli\u003eInput Impedance: 10 kΩ\/leg\u003c\/li\u003e \u003cli\u003eFrequency Response: 400 kHz (-3 dB)\u003c\/li\u003e \u003cli\u003eSignal to noise ratio: \u0026gt;110 dB (DIN)\u003c\/li\u003e \u003cli\u003eCrosstalk: \u0026gt;100 dB\u003c\/li\u003e \u003cli\u003eTHD: \u0026gt;0.002%\/-95 dB\u003c\/li\u003e \u003cli\u003eDimensions (HxWxD): 145 x 483 x 366 mm\u003c\/li\u003e \u003c\/ul\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47248190046345,"sku":"62960","price":4490.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-12p1-pro_62960_1_a8f0f750-d03c-47a4-b1d7-1160e729676e.jpg?v=1784047097"},{"product_id":"atc-loudspeakers-scm12-pro-pair","title":"ATC Loudspeakers SCM12 Pro 2-Way Passive Monitor - Pair","description":"\u003cp\u003eThe \u003cstrong\u003eATC SCM12 Pro\u003c\/strong\u003e is a passive two-way studio monitor that combines outstanding clarity and class-leading dynamic range in a compact, affordable package. Equipped with a state-of-the-art CLD mid\/bass driver and a dual-suspension tweeter, SMSC12 Pro monitors deliver balanced, neutral sound with a wide sweet spot. With high-performance components a compact footprint, SMSC12 Pro monitors are ideal for critical near-field listening in small-to-medium control rooms.\u003c\/p\u003e\r\n\u003ch3\u003eDUAL SUSPENSION TWEETER\u003c\/h3\u003e\r\n\u003cp\u003eThe ATC SMSC12 Pro features a one-inch soft dome tweeter with an innovative dual suspension design for silky smooth highs up to 22 kHz. Unlike conventional tweeters, ATC’s dual suspension tweeters offer far greater control of the voice coil and dome motion—especially at higher sound pressure levels. By reducing internal distortion, this groundbreaking design delivers detailed highs with improved clarity and definition. ATC’s dual suspension tweeters also significantly reduce listener fatigue, allowing you to work on long mixing projects without losing perspective.\u003c\/p\u003e\r\n\u003ch3\u003eCONSTRAINED LAYER DAMPING DRIVER\u003c\/h3\u003e\r\n\u003cp\u003eSMSC12 Pro studio monitors are equipped with ATC’s legendary six-inch Constrained Layer Damping (CLD) mid\/bass driver. With a 1.75-inch diameter voice coil, and a Finite Element Analysis (FEA) optimized high-energy symmetric gap motor system, CLD drivers deliver an extended dynamic range for powerful, distortion-free low-end even at high SPLs. ATC’s Constrained Layer Damping technology uses multiple laminated fabric cones to form a stiff, light, driver cone for smoother on- and off-axis frequency response and minimal distortion.\u003c\/p\u003e\r\n\u003ch3\u003eSUGGESTED AMPLIFICATION\u003c\/h3\u003e\r\n\u003cp\u003eSMSC12 Pro studio monitors feature a high-performance passive crossover with 250 VDC metalized polypropylene capacitors and hand-wound air-cored type inductors for minimal signal loss and distortion. While SMSC12 Pro studio monitors are designed to work with any traditional power amp, they perform best when paired with ATC’s 150 W per-channel P1 Pro dual-mono power amplifier. With class-leading power output and outstanding sonic resolution, ATC power amps deliver unparalleled performance.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDrivers: HF ATC 1˝\/25 mm dual suspension Soft Dome (SH25-76 6 Ohm) \/ LF ATC 6˝\/150 mm Constrained Layer Damping (CLD) (SB50-150CLD 8 Ohm)\u003c\/li\u003e\r\n\u003cli\u003eAmplitude Linearity: 80 Hz – 16 kHz (±2 dB)\u003c\/li\u003e\r\n\u003cli\u003eCut Off Frequencies: 56 Hz – 22 kHz (-6 dB freestanding)\u003c\/li\u003e\r\n\u003cli\u003eDispersion: ±80° Coherent Horizontal, ±10° Coherent Vertical\u003c\/li\u003e\r\n\u003cli\u003eMaximum Continuous SPL: 108dB (per pair @ 1m)\u003c\/li\u003e\r\n\u003cli\u003eCrossover Frequency: 2.2 kHz\u003c\/li\u003e\r\n\u003cli\u003eRecommended Power Amplifier: 75 to 300 Watts\u003c\/li\u003e\r\n\u003cli\u003eNominal Impedance: 8 Ohm\u003c\/li\u003e\r\n\u003cli\u003eConnectors: Binding Posts\/4mm Plugs, bi-wire\u003c\/li\u003e\r\n\u003cli\u003eCabinet Dimensions (HxWxD): 400 x 238 x 235 mm\/15.7˝ x 9.4˝ x9.3˝\u003c\/li\u003e\r\n\u003cli\u003eWeight: 11 kg\/24 lbs (per cabinet)\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47248190177417,"sku":"62957","price":2290.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-scm12-pro-pair_62957_1_13b9cd68-6a9c-4552-8964-3f549cc87f81.jpg?v=1784047097"},{"product_id":"atc-loudspeakers-scm12-pro-pair-demo-deal","title":"ATC Loudspeakers SCM12 Pro - Pair (Demo Deal)","description":"\u003cp\u003eAs an all-new design, the \u003cstrong\u003eATC Loudspeakers SCM12 Pro's\u003c\/strong\u003e acclaimed performance at a lower price point without compromising component quality and achieves this in a more compact, installation-friendly footprint ideally suited to nearfield monitoring as well as multichannel music and post-production applications.\u003c\/p\u003e  \u003chr\u003e   \u003cp\u003e\u003cem\u003e“Anyone who has been waiting for an ATC nearfield with a smaller footprint, that is more easily installed, or that is more affordable, yet still delivers undiminished ATC performance, then the SCM12 Pro could be for them.”\u003c\/em\u003e says ATC Technical Sales Manager Ben Lilly, before adding: \u003cem\u003e“ATC R\u0026amp;D Manager Richard Newman has poured the same knowhow, time, and passion into this new model that has made the rest of the professional product line so successful. Users will find that productions completed using the SCM12 Pro will translate beautifully to other systems and that their incredibly low distortion makes listening to them a pleasure — even after long hours in the studio. At under £1,150.00 per pair, they may prove ideal for those seeking to upgrade ageing, hard-to-repair passive studio monitors.”\u003c\/em\u003e\u003c\/p\u003e  \u003chr\u003e   \u003cp\u003eThough the SCM12 Pro is the most affordable model in the professional range of loudspeakers, the monitor makes use of the ATC’s celebrated drive units for both the mid\/bass and tweeter, both being meticulously hand built at the UK facility.\u003c\/p\u003e  \u003cp\u003eThe tweeter is a 25mm\/one-inch soft-dome designed around ATC’s unique dual-suspension technology. Unlike conventional tweeters, this precision part employs two suspensions, offering far greater control of the voice coil and dome motion — especially at higher sound pressure levels. The result is an extended high-frequency response with much greater clarity and definition due to the reduction in disturbing an-harmonic distortion. Listener fatigue is also greatly reduced, resulting in users being able to work for longer periods with greater accuracy.\u003c\/p\u003e  \u003cp\u003eAt the lower end of the frequency spectrum, mid\/bass reproduction is handled by ATC’s 150mm\/six-inch proprietary CLD drive unit. Using a 45mm\/1.75-inch diameter voice coil, and employing an FEA (Finite Element Analysis) optimised high-energy symmetric gap motor system, the driver is capable of tremendous dynamic range with minimal power compression. Cone construction is courtesy of another proprietary ATC technology that represents another advance in driver performance — namely, Constrained Layer Damping (CLD), a process that uses multiple laminated fabric cones to form a stiff, light, and tremendously well-damped structure. Speaking acoustically, this construction creates a smoother on- and off-axis frequency response and also a reduction in distortion leading to a more lifelike reproduction of source material. Meaningfully, judgements and decisions can be made more quickly, more accurately, and for longer periods of time by busy working audio professionals.\u003c\/p\u003e  \u003cp\u003ePut it another way: by employing exceptional drive units, the passive crossover can, by design, use the minimum number of components in a simple, second-order implementation. Indeed, the capacitors are all 250Vdc metalized polypropylene and all the inductors are air-cored types for minimal signal distortion. Additionally, all of the inductors are wound in house with very high-purity copper while large-gauge wire is used for the bass components to minimize signal losses.\u003c\/p\u003e  \u003cp\u003eLooking beyond the release of the superb-sounding SCM12 Pro, an install-specific sibling, the SCM12i, will be available as of Q1 2017. This model will feature threaded mounting points to mate with widely-available wall and ceiling brackets from K\u0026amp;M and Adaptive Technologies to simplify installation — incredibly useful in complex multichannel systems, such as those required by Auro 3-D, Dolby ATMOS, or DTS:X.\u003c\/p\u003e  \u003cp\u003eDiscerning audio professionals always appreciate that exceptional passive monitors require exceptional amplification; as far as the SCM12 Pro is concerned, the best possible results will be achieved when it is partnered with ATC’s own range of stereo power amplifiers. As such, the 150 W per-channel P1 Pro dual-mono power amplifier is the perfect partner — both in terms of power output and its outstanding resolution, resulting from technology originally developed for ATC’s high-end active monitoring systems.  So customers can comfortably make the upgrade to an all-ATC monitoring and amplification system, an attractive package price will be offered for purchasing the two products simultaneously.\u003c\/p\u003e  \u003cp\u003eSimple, well-engineered products almost always trump feature-rich, cost-engineered alternatives, and ATC’s SCM12 Pro has been duly designed with that philosophy very much intact. Its neutral fidelity makes it a very versatile proposition, one which — when backed up with the company’s industry-leading six-year warranty — makes for a high-value, longterm investment for anyone looking to upgrade their monitoring system. So now is the time to consider EQ’ing, balancing, and editing faster, with more consistent results and reduced listening fatigue using the latest nearfield monitoring marvel from ATC.\u003c\/p\u003e     \u003ch3\u003eSpecifications:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eDrivers: HF ATC 1˝\/25 mm dual suspension Soft Dome (SH25-76 6 Ohm) \/ LF ATC 6˝\/150 mm Constrained Layer Damping (CLD) (SB50-150CLD 8 Ohm)\u003c\/li\u003e \u003cli\u003eAmplitude Linearity: 80 Hz – 16 kHz (±2 dB)\u003c\/li\u003e \u003cli\u003eCut Off Frequencies: 56 Hz – 22 kHz (-6 dB freestanding)\u003c\/li\u003e \u003cli\u003eDispersion: ±80° Coherent Horizontal, ±10° Coherent Vertical\u003c\/li\u003e \u003cli\u003eMaximum Continuous SPL: 108dB (per pair @ 1m)\u003c\/li\u003e \u003cli\u003eCrossover Frequency: 2.2 kHz\u003c\/li\u003e \u003cli\u003eRecommended Power Amplifier: 75 to 300 Watts\u003c\/li\u003e \u003cli\u003eNominal Impedance: 8 Ohm\u003c\/li\u003e \u003cli\u003eConnectors: Binding Posts\/4mm Plugs, bi-wire\u003c\/li\u003e \u003cli\u003eCabinet Dimensions (HxWxD): 400 x 238 x 235 mm\/15.7˝ x 9.4˝ x9.3˝\u003c\/li\u003e \u003cli\u003eWeight: 11 kg\/24 lbs (per cabinet)\u003c\/li\u003e \u003c\/ul\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47248235823241,"sku":"72052","price":2059.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-scm12-pro-pair_62957_1_1.jpg?v=1784047259"},{"product_id":"atc-loudspeakers-scm25a-pro-monitor-pair-21482149-used","title":"ATC Loudspeakers SCM25A Pro Monitor Pair #2148\/2149 (Used)","description":"Designed for positioning on a meter bridge, or rack-mountable for broadcast applications, the \u003cstrong\u003eATC SCM25A Pro\u003c\/strong\u003e offers very high-performance in the most compact possible form factor.\u003cbr\u003eThe SCM25A Pro incorporates ATC's proprietary short coil seven-inch carbon-paper woofer, a three-inch soft dome midrange driver and a one-inch silk dome tweeter in a ported enclosure that measures 10.4 inches (264 mm) (H) x 16.9 inches (430 mm) (W) x 16 inches (408 mm) (D). The integrated tri-amplifier generates 150 W RMS for the woofer, 50 W RMS for the midrange and 25 W RMS for the tweeter. The passively cooled amp pack also features FET limiting. The crossovers are all 4th order, critically damped with phase compensation.\u003cbr\u003eThe SCM25A Pro produces a wide, stable soundfield with very low coloration and offers low frequency extension to 42 Hz (-6dB).","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47248242376841,"sku":"61890","price":6495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-loudspeakers-scm25a-pro-monitor-pair-21482149-used-7224002_3efbc1fa-f4fd-400f-b49e-b0e77cb1b927.jpg?v=1784047286"},{"product_id":"atc-loudspeakers-scm45a-pro-pair-076077-used","title":"ATC Loudspeakers SCM45A Pro - Pair #076\/077 (Used)","description":"\u003ctbody\u003e\u003ctr\u003e\u003ctd class=\"bglttext\" style=\"background-color: rgb(255, 255, 255); font-size: 8pt;\"\u003eProprietary ATC 25mm\/1” Dual Suspension Super Tweeter\u003cbr\u003eATC hand built 3”\/75mm Soft Dome mid-range driver.\u003cbr\u003e2 x ATC hand built 6.5”\/164mm carbon-paper cone bass drivers.\u003cbr\u003eOn-board grounded source 235 watt Class A\/B Tri-amplifier.\u003cbr\u003eCompact size with high output and low cut-off frequency.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47248252043401,"sku":"57492","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-loudspeakers-scm45a-pro---pair-076077-used-7297106_4685e49c-26c4-4624-907b-f05a47336d94.jpg?v=1784047323"},{"product_id":"atc-scm12-pair-2-drawmer-mpa-90-bundle","title":"ATC SCM12 Pair + (2) Drawmer MPA-90 Bundle","description":"\u003cp\u003eThe \u003cstrong\u003eATC SCM12 Pair + (2) Drawmer MPA-90 Bundle\u003c\/strong\u003e combines the MPA-90's high performance Class D power amplification (delivered in mono mode by each) to ATC's compact high-performance 6-inch, 2-way passive studio monitors - the perfect combination for critical near-field listening!\u003c\/p\u003e\r\n\r\n\u003chr\u003e\r\n\r\n\r\n\u003ch3\u003eSCM12\u003c\/h3\u003e\r\n\r\n\u003cp\u003eAs an all-new design, the ATC Loudspeakers SCM12 Pro's acclaimed performance at a lower price point without compromising component quality and achieves this in a more compact, installation-friendly footprint ideally suited to near-field monitoring as well as multichannel music and post-production applications.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe tweeter is a 25 mm\/one-inch soft-dome designed around ATC’s unique dual-suspension technology. Unlike conventional tweeters, this precision part employs two suspensions, offering far greater control of the voice coil and dome motion — especially at higher sound pressure levels. The result is an extended high-frequency response with much greater clarity and definition due to the reduction in disturbing an-harmonic distortion. Listener fatigue is also greatly reduced, resulting in users being able to work for longer periods with greater accuracy.\u003c\/p\u003e\r\n\r\n\u003cp\u003eAt the lower end of the frequency spectrum, mid\/bass reproduction is handled by ATC’s 150 mm\/six-inch proprietary CLD drive unit. Using a 45 mm\/1.75-inch diameter voice coil, and employing an FEA (Finite Element Analysis) optimized high-energy symmetric gap motor system, the driver is capable of tremendous dynamic range with minimal power compression. Cone construction is courtesy of another proprietary ATC technology that represents another advance in driver performance — namely, Constrained Layer Damping (CLD), a process that uses multiple laminated fabric cones to form a stiff, light, and tremendously well-damped structure. Speaking acoustically, this construction creates a smoother on- and off-axis frequency response and also a reduction in distortion leading to a more lifelike reproduction of source material. Meaningfully, judgements and decisions can be made more quickly, more accurately, and for longer periods of time by busy working audio professionals.\u003c\/p\u003e\r\n\r\n\u003cp\u003eSimple, well-engineered products almost always trump feature-rich, cost-engineered alternatives, and ATC’s SCM12 Pro has been duly designed with that philosophy very much intact. Its neutral fidelity makes it a very versatile proposition, one which — when backed up with the company’s industry-leading six-year warranty — makes for a high-value, longterm investment for anyone looking to upgrade their monitoring system. So now is the time to consider EQ’ing, balancing, and editing faster, with more consistent results and reduced listening fatigue using the latest near-field monitoring marvel from ATC.\u003c\/p\u003e\r\n\r\n\r\n\r\n\r\n\u003ch3\u003eSPECIFICATIONS:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eDrivers: HF ATC 1˝\/25 mm dual suspension Soft Dome (SH25-76 6 Ohm) \/ LF ATC 6˝\/150 mm Constrained Layer Damping (CLD) (SB50-150CLD 8 Ohm)\u003c\/li\u003e\r\n\u003cli\u003eAmplitude Linearity: 80 Hz – 16 kHz (±2 dB)\u003c\/li\u003e\r\n\u003cli\u003eCut Off Frequencies: 56 Hz – 22 kHz (-6 dB freestanding)\u003c\/li\u003e\r\n\u003cli\u003eDispersion: ±80° Coherent Horizontal, ±10° Coherent Vertical\u003c\/li\u003e\r\n\u003cli\u003eMaximum Continuous SPL: 108 dB (per pair @ 1m)\u003c\/li\u003e\r\n\u003cli\u003eCrossover Frequency: 2.2 kHz\u003c\/li\u003e\r\n\u003cli\u003eRecommended Power Amplifier: 75 to 300 Watts\u003c\/li\u003e\r\n\u003cli\u003eNominal Impedance: 8 Ohm\u003c\/li\u003e\r\n\u003cli\u003eConnectors: Binding Posts\/4 mm Plugs, bi-wire\u003c\/li\u003e\r\n\u003cli\u003eCabinet Dimensions (H x W x D): 400 x 238 x 235 mm\/15.7˝ x 9.4˝ x 9.3˝\u003c\/li\u003e\r\n\u003cli\u003eWeight: 11 kg\/24 lb (per cabinet)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003chr\u003e\r\n\r\n\r\n\u003ch3\u003eMPA-90\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe Drawmer MPA-90  is perfect for powering passive monitors in the studio.\u003c\/p\u003e\r\n\r\n\u003cp\u003eFeatures include thermal, overload and power up\/power down protection and an output clipping indicator. In addition, it has switchable balanced XLR and unbalanced Phono inputs to suit your system.\u003c\/p\u003e\r\n\r\n\u003cp\u003eOne very smart feature of the MPA-90 is that, in addition to standard Stereo Power Amplifier operation, with the flick of a switch to set the MPA-90 to mono mode, and a little speaker cable rewiring, it functions as a 180 W into 8 Ohms Monoblock, allowing the system to operate in bi-amped or bridged modes.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eFEATURES:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003e90 + 90 W RMS into 4 Ohms\u003c\/li\u003e\r\n\u003cli\u003e50 + 50 W RMS into 8 Ohms\u003c\/li\u003e\r\n\u003cli\u003e1 x 180 W into 8 Ohms bridged mode\u003c\/li\u003e\r\n\u003cli\u003eStereo\/Mono switch to use as a stereo amplifier or as a monoblock in Bridged or Bi-Amp Modes\u003c\/li\u003e\r\n\u003cli\u003eSwitchable balanced Neutrik XLR and unbalanced phono inputs\u003c\/li\u003e\r\n\u003cli\u003eEfficient, low heat design with low power consumption - consumes only 10 W of power when idling and a maximum power consumption of 55 W when driven, and only 0.2 W when in standby mode\u003c\/li\u003e\r\n\u003cli\u003eThermal, overload and power up\/power down protection\u003c\/li\u003e\r\n\u003cli\u003eStandby, fault and clip indicators\u003c\/li\u003e\r\n\u003cli\u003eRugged steel chassis and stylish brushed aluminum cover\u003c\/li\u003e\r\n\u003cli\u003eCan be stacked and is rack mountable (with the MCB 2U mounting kit)\u003c\/li\u003e\r\n\u003cli\u003eDimensions: L 272 mm x W 215 mm x H 81 mm\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47248324984969,"sku":"87323","price":3380.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/act-smc12-drawmer-mpa-90_87323_1_5d2662cf-683f-40ea-8c0c-d20c8d38fc57.jpg?v=1784047581"},{"product_id":"atc-loudspeakers-scm25a-pro-monitor-pair-2592-2593-used","title":"ATC Loudspeakers SCM25A Pro Monitor - Pair #2592\/2593 (Used)","description":"Designed for positioning on a meter bridge, or rack-mountable for broadcast applications, the \u003cstrong\u003eATC SCM25A Pro\u003c\/strong\u003e offers very high-performance in the most compact possible form factor.\u003cbr\u003eThe SCM25A Pro incorporates ATC's proprietary short coil seven-inch carbon-paper woofer, a three-inch soft dome midrange driver and a one-inch silk dome tweeter in a ported enclosure that measures 10.4 inches (264 mm) (H) x 16.9 inches (430 mm) (W) x 16 inches (408 mm) (D). The integrated tri-amplifier generates 150 W RMS for the woofer, 50 W RMS for the midrange and 25 W RMS for the tweeter. The passively cooled amp pack also features FET limiting. The crossovers are all 4th order, critically damped with phase compensation.\u003cbr\u003eThe SCM25A Pro produces a wide, stable soundfield with very low coloration and offers low frequency extension to 42 Hz (-6dB).","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47248340451465,"sku":"84212","price":6495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-loudspeakers-scm25a-pro-monitor-pair-2592-2593-used_84212_1_fa9c92c8-a3c9-47c8-aa27-f3df23ef29da.jpg?v=1784047637"},{"product_id":"atc-sh25-76s-demo-deal","title":"ATC SH25-76S (Demo Deal)","description":"\u003cp\u003eAfter considerable development time the “S-SPEC’ tweeter completes the rollout of proprietary drivers across every ATC loudspeaker system. Six years in the making, the new \u003cstrong\u003eATC SH25-76S\u003c\/strong\u003e design is a significant technical advance for ATC and a proud achievement for Managing Director Billy Woodman and R\u0026amp;D Manager Richard Newman. The Woodman\/Newman collaboration has ensured that both the standard SH25-76 (as fitted to the Company’s SCM7\/11\/19\/40\/40A models) and ‘S-Spec’ SH25-76S tweeters exceed the exceptionally high levels of performance and consistency expected of an ATC driver.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe advent of the SH25-76S means that for the first time in a distinguished forty-year history, every ATC speaker system is able to benefit from complete ATC driver configurations, wholly designed and hand-built at the company’s UK development and production facility at Stroud, Gloucestershire. Now introduced on the Tower Series (SCM20\/50\/100\/150), Anniversary Series (SCM50\/100\/150) and Classic Series (SCM20\/50\/100\/150), the SH25-76S is ATC’s premium 25 mm soft dome tweeter, developed with a no-compromise engineering approach in order to complement the renowned SM75-150S Super Dome mid-range driver.\u003c\/p\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47248350281865,"sku":"91132","price":315.62,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-sh25_91132_1_2c32f9b3-7a9b-4a26-9878-8be90b5ec1dd.jpg?v=1784047669"},{"product_id":"atc-loudspeakers-scm25a-pro-monitor-pair-3598-3599-used","title":"ATC Loudspeakers SCM25A Pro Monitor - Pair #3598\/3599 (Used)","description":"Designed for positioning on a meter bridge, or rack-mountable for broadcast applications, the \u003cstrong\u003eATC SCM25A Pro\u003c\/strong\u003e offers very high-performance in the most compact possible form factor.\u003cbr\u003eThe SCM25A Pro incorporates ATC's proprietary short coil seven-inch carbon-paper woofer, a three-inch soft dome midrange driver and a one-inch silk dome tweeter in a ported enclosure that measures 10.4 inches (264 mm) (H) x 16.9 inches (430 mm) (W) x 16 inches (408 mm) (D). The integrated tri-amplifier generates 150 W RMS for the woofer, 50 W RMS for the midrange and 25 W RMS for the tweeter. The passively cooled amp pack also features FET limiting. The crossovers are all 4th order, critically damped with phase compensation.\u003cbr\u003eThe SCM25A Pro produces a wide, stable soundfield with very low coloration and offers low frequency extension to 42 Hz (-6dB).","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47248371515529,"sku":"88994","price":6495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-loudspeakers-scm25a-pro-monitor-pair-3598-3599-used_88994_1_de7aa8eb-567a-43bc-a911-c886384361dc.jpg?v=1784047742"},{"product_id":"atc-loudspeakers-scm1-15asl-single-demo-deal","title":"ATC Loudspeakers SCM1-15ASL - Single (Demo Deal)","description":"\u003cp\u003eThe \u003cspan style=\"font-weight: bold;\"\u003eATC SCM0.1\/15ASL Sub\u003c\/span\u003e uses the incredible ATC invention, the SL driver. 375mm (15\") in diameter, it is the largest of the SL driver options and offers the lowest 3rd harmonic distortion of any large woofer we know, typically reducing it by 35dB. A massive built-in 1000W ATC high speed amplifier delivers over 118dB spl at 28Hz, an amazing feat.  This sub is floor loaded to couple with almost any room properly (far better than any front loaded type sub).  It also offers a nice user interface that addresses Billy Woodman’s philosophy of “no bass management”.  The ATC sub has a dual XLR (L\/R) input, an amp gain control, a LP filter with user selectable frequencies of 2K, 180Hz, 120, 90, 70, 50Hz.  There is also a “contour” control that enables a peak type filter (boost) into the amplifier at around 100Hz if you want to compensate for AC3 or source deficiencies.\u003cbr\u003e\u003cbr\u003eATC recommends no “bass management” or, no roll off for the main speakers when used with a sub.  This bass management filtering artificially colors the main speaker sound and introduces filter\/phase problems.  ATC’s thought is that bass management was largely created to protect woofers in tiny satellites, not to improve overall response or transition between sub and mains. Run the main speakers full range and the sub at the widest possible bandwidth, then lower the LP filter freq to the sub from there.  This generates a nice result and creates a smooth transition between mains and subs.\u003cbr\u003e\u003cbr\u003eThe ATC sub package is flat to 28Hz and is very clean.  True low distortion woofer output below 100Hz is a thing of beauty and we’ve heard it ONLY in the ATC.  Do not expect to be “knocked down” with huge quantities of bass.  Much of what we think is massive bass is really just loads of distortion at 200Hz to 300Hz! Sometimes this distortion can approach 40 to 50% of the total sub output!  So word to the wise, do not buy this ATC sub for showing off to clients.  It is a precision tool and engineers window into the “below 100 Hz” world of a mix; a near perfect mate to ATC mains.  If you are making judgments on bass content we see no other way you can to do it properly than with the ATC sub.\u003cbr\u003e\u003cbr\u003eA single ATC SCM 0.1\/15ASL will deliver output SPL of 118dB (1W\/1M).  If you need more output you must add units.  A single 1-15 sub is 118dB SPL, 2 is 121dB SPL, 4 is 124dB SPL and 8 is insane!\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDriver: LF 375mm\u003c\/li\u003e\r\n\u003cli\u003eAmplitude Linearity (±2dB): 30Hz-300Hz\u003c\/li\u003e\r\n\u003cli\u003eCut-off Frequency (-6dB, free-standing): 20Hz\u003c\/li\u003e\r\n\u003cli\u003eMax. Continuous SPL (1 metre): 115dB\u003c\/li\u003e\r\n\u003cli\u003eInput Connectors: Male XLR\u003c\/li\u003e\r\n\u003cli\u003eInput Sensitivity: 1V\u003c\/li\u003e\r\n\u003cli\u003eInput Impedance: Balanced \u0026gt; 10kΩ\u003c\/li\u003e\r\n\u003cli\u003eAmplifier Output: Bass 650W\u003c\/li\u003e\r\n\u003cli\u003eFilters: Even Order Critically Damped\u003c\/li\u003e\r\n\u003cli\u003eOverload Protection: Active FET momentary gain reduction\u003c\/li\u003e\r\n\u003cli\u003ePanel Indicators: Power On indicator\u003c\/li\u003e\r\n\u003cli\u003eDimensions (HxWxD): 624 x 580 x 580mm (24.6″ x 22.8″ x 22.8″)\u003c\/li\u003e\r\n\u003cli\u003eWeight: 60kg (132lb)\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47248375021705,"sku":"94920","price":6989.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc_sub_1_15_2_5c2faf54-52c7-4931-a080-64b4273fca53.jpg?v=1784047754"},{"product_id":"atc-loudspeakers-scm25a-pro-monitor-pair-1120-1121-used","title":"ATC Loudspeakers SCM25A Pro Monitor - Pair #1120\/1121 (Used)","description":"Designed for positioning on a meter bridge, or rack-mountable for broadcast applications, the \u003cstrong\u003eATC SCM25A Pro\u003c\/strong\u003e offers very high-performance in the most compact possible form factor.\u003cbr\u003eThe SCM25A Pro incorporates ATC's proprietary short coil seven-inch carbon-paper woofer, a three-inch soft dome midrange driver and a one-inch silk dome tweeter in a ported enclosure that measures 10.4 inches (264 mm) (H) x 16.9 inches (430 mm) (W) x 16 inches (408 mm) (D). The integrated tri-amplifier generates 150 W RMS for the woofer, 50 W RMS for the midrange and 25 W RMS for the tweeter. The passively cooled amp pack also features FET limiting. The crossovers are all 4th order, critically damped with phase compensation.\u003cbr\u003eThe SCM25A Pro produces a wide, stable soundfield with very low coloration and offers low frequency extension to 42 Hz (-6dB).","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47248395567241,"sku":"94701","price":6495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-loudspeakers-scm25a-pro-monitor-pair-1120-1121-used_94701_1_0040f2d6-cb17-494b-8387-3f1b7ef35730.jpg?v=1784047830"},{"product_id":"atc-loudspeakers-scm20psl-p2-bundle","title":"ATC Loudspeakers SCM20PSL\/P2 Bundle","description":"\u003cp\u003eThe \u003cstrong\u003eATC Loudspeakers SCM20PSL\/P2 Bundle\u003c\/strong\u003e pairs together a pair SCM20PSL passive monitors with the 300 watt dual mono P2 Pro Amplifier. This is the perfect bundle for attaining high-end ATC monitoring in home studios.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe \u003cstrong\u003eATC SCM20PSL MK2\u003c\/strong\u003e  loudspeakers maintain the strict performance criteria of ATC reference monitors, the SCM 20SL MKII offers project and home studios the dynamic range and pristine imaging ATC is known for worldwide.\u003c\/p\u003e\r\n\r\n\u003cp\u003eDesigned to fit within the company's highly-regarded line of speakers, the ATC \"Passive 20\" features the same ATC built woofer and tweeter as the active (SCM20ASL) version of the speaker. The SCM20SL MKII passives are housed in a conventional \"pro-black\" box for easy placement on any meter bridge.\u003c\/p\u003e\r\n\r\n\u003cp\u003eATC recommends amplifiers with at least 200W per channel of power. The Passive 20 loudspeaker enables ATC speaker fans to own a high-performance monitor at half the price of the actives.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe SCM20SL Passive low-frequency section is a hybrid design incorporating a 150mm bass cone with a grafted 75mm soft dome for mid-range assist. The woofer magnet assembly utilizes ATC's unique \"SL\" technology to greatly reduce third harmonic distortion and reveal mistakes and details. The tweeters are ATCs new dual suspension high powered tweeters. They do not use ferro fluid for cooling so will last a lifetime. A newly redesigned crossover ensures a smooth transition across all frequencies. All ATC drivers are manufactured in-house to exacting tolerances and are legendary for their many design innovations.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eSPECIFICATIONS:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eMax Continuous SPL: 108 dB\u003c\/li\u003e\r\n\u003cli\u003eCrossover: 2.8 kHz\/ Internal, 2nd order,passive\u003c\/li\u003e\r\n\u003cli\u003eWoofer: ATC 6.5\"SL\u003c\/li\u003e\r\n\u003cli\u003eTweeter: 1\" dome\u003c\/li\u003e\r\n\u003cli\u003eH\/W\/D in inches: 17.3\/9.9\/11.9\u003c\/li\u003e\r\n\u003cli\u003eWeight: 44 lb ea\u003c\/li\u003e\r\n\u003cli\u003eShipping Weight: 50 lb ea\u003c\/li\u003e\r\n\u003cli\u003eCabinet: Wood, Black Ash\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003chr\u003e\r\n\r\n\r\n\u003cp\u003eThe \u003cstrong\u003eATC Loudspeakers P2 Pro Amplifier\u003c\/strong\u003e is true dual-mono power amplifier delivering 300 W per channel with minimal crosstalk.\u003c\/p\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47248433119369,"sku":"99883","price":6490.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-scm20psl-p2-bundle_99883_1_ed4c31dc-66c0-42ca-afb0-d7c602a80610.jpg?v=1784047960"},{"product_id":"atc-loudspeakers-scm25a-pro-monitor-pair-3234-3235-used","title":"ATC Loudspeakers SCM25A Pro Monitor - Pair #3234\/3235 (Used)","description":"Designed for positioning on a meter bridge, or rack-mountable for broadcast applications, the \u003cstrong\u003eATC SCM25A Pro\u003c\/strong\u003e offers very high-performance in the most compact possible form factor.\u003cbr\u003eThe SCM25A Pro incorporates ATC's proprietary short coil seven-inch carbon-paper woofer, a three-inch soft dome midrange driver and a one-inch silk dome tweeter in a ported enclosure that measures 10.4 inches (264 mm) (H) x 16.9 inches (430 mm) (W) x 16 inches (408 mm) (D). The integrated tri-amplifier generates 150 W RMS for the woofer, 50 W RMS for the midrange and 25 W RMS for the tweeter. The passively cooled amp pack also features FET limiting. The crossovers are all 4th order, critically damped with phase compensation.\u003cbr\u003eThe SCM25A Pro produces a wide, stable soundfield with very low coloration and offers low frequency extension to 42 Hz (-6dB).","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47248463036553,"sku":"101703","price":6495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-loudspeakers-scm25a-pro-monitor-pair-3234-3235-used_101703_1_764cc466-f650-42df-826b-394bcf9dc8de.jpg?v=1784048073"},{"product_id":"atc-scm12i-install-monitor","title":"ATC SCM12i Pro Compact 2-Way Passive Install Monitor - Pair","description":"\u003cp\u003eThe \u003cstrong\u003eATC SCM12i Pro Install Monitor\u003c\/strong\u003e is a compact 2-way passive monitor designed for installation into recording, post production, broadcast and film studios. It’s compact size and exceptional performance make it an ideal loudspeaker for use in surround\/multi-channel recording\/mixing and immersive audio applications such as Dolby Atmos, DTS:X and Auro 3D. Equipped with a state-of-the-art CLD mid\/bass driver and a dual-suspension tweeter, SMSC12 Pro monitors deliver outstanding clarity and class-leading dynamic range.\u003c\/p\u003e\r\n\u003ch3\u003eSUPER-SIMPLE INSTALLATION\u003c\/h3\u003e\r\n\u003cp\u003eThe SCM12i Pro Install is fitted with four M8 mounting points in the rear face for quick and easy permanent installation. Compatible with widely-available multi-mount pan and tilt mounting brackets, SCM12i can be safely and securely mounted to the ceiling and walls for advanced surround sound setups.\u003c\/p\u003e\r\n\u003ch3\u003eDUAL SUSPENSION TWEETER\u003c\/h3\u003e\r\n\u003cp\u003eThe ATC SMSC12i Pro Install features a 1-inch soft dome tweeter with an innovative dual-suspension design for silky smooth highs up to 22 kHz. Unlike conventional tweeters, ATC’s dual-suspension tweeters offer far greater control of the voice coil and dome motion, especially at higher sound pressure levels. By reducing internal distortion, this groundbreaking design delivers an extended high-frequency response with improved clarity and definition. ATC’s dual-suspension tweeters also significantly reduce listener fatigue, allowing you to work on long mixing projects without losing perspective.\u003c\/p\u003e\r\n\u003ch3\u003eCONSTRAINED LAYER DAMPING DRIVER\u003c\/h3\u003e\r\n\u003cp\u003eSMSC12i Pro Install studio monitors are equipped with ATC’s legendary 6-inch Constrained Layer Damping (CLD) mid\/bass driver. With a 1.75-inch diameter voice coil, and a Finite Element Analysis (FEA) optimized high-energy symmetric gap motor system, CLD drivers deliver an extended dynamic range for powerful, distortion-free low-end even at high SPLs. ATC’s Constrained Layer Damping technology uses multiple laminated fabric cones to form a stiff, light, driver cone for smoother on- and off-axis frequency response and minimal distortion.\u003c\/p\u003e\r\n\u003ch3\u003eSUGGESTED AMPLIFICATION\u003c\/h3\u003e\r\n\u003cp\u003eSMSC12i Pro Install studio monitors feature a high-performance passive crossover with 250 VDC metalized polypropylene capacitors and hand-wound air-cored type inductors for minimal signal loss and distortion. While SMSC12i Pro Install studio monitors are designed to work with any traditional power amp, they perform best when paired with ATC’s 150 W per-channel P1 Pro dual-mono power amplifier. With class-leading power output and outstanding sonic resolution, ATC power amps deliver unparalleled performance.\u003c\/p\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47248527687817,"sku":"113505","price":2890.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-scm12i-pro-pair_113505_1_e67933dd-2fb2-4f61-a898-4df4ae6e5dcc.jpg?v=1784048294"},{"product_id":"atc-loudspeakers-scm20asl-pro-mk2-pair-b-stock","title":"ATC Loudspeakers SCM20ASL Pro MK2 - Pair (B-Stock)","description":"\u003cp\u003eThe \u003cstrong\u003eATC Loudspeakers SCM20ASL Pro MK2\u003c\/strong\u003e is ideally suited for critical near-field listening applications in all control rooms, LCR surround monitoring in small-to-medium control rooms and surround channels in medium-to-large control rooms.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eProprietary ATC 150mm\/6” Super Linear Mid\/Bass Driver\u003c\/li\u003e\r\n\u003cli\u003eProprietary ATC 25mm\/1” Dual Suspension ‘S-Spec’ Tweeter\u003c\/li\u003e\r\n\u003cli\u003eDiscrete MOSFET class A\/B bi-amp pack. LF 200W \u0026amp; HF 50W\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDrivers: LF 6.5”\/150mm Super Linear, HF 1”\/25mm Dual-Suspension ‘S-Spec’ Tweeter\u003c\/li\u003e\r\n\u003cli\u003eAmplitude linearity : 80Hz – 20kHz (+\/-2dB)\u003c\/li\u003e\r\n\u003cli\u003eCut-off frequencies : 55Hz – 25kHz (-6dB freestanding)\u003c\/li\u003e\r\n\u003cli\u003eDispersion : +\/-80° coherent horizontal, +\/-10° coherent vertical\u003c\/li\u003e\r\n\u003cli\u003eMaximum continuous : SPL 108dB (per pair @ 1m)\u003c\/li\u003e\r\n\u003cli\u003eAudio input : Rear panel mounted female XLR (pin 2 +ve)\u003c\/li\u003e\r\n\u003cli\u003eInput sensitivity : 1V\/2V RMS or +2.2\/+8.2dBu via switch (ref. bass full output)\u003c\/li\u003e\r\n\u003cli\u003eInput sensitivity trim : 0dB to -6dB (via rear panel pot)\u003c\/li\u003e\r\n\u003cli\u003eTotal input sensitivity range : 1V\/+2.2dBu to 4V\/+14.2dBu\u003c\/li\u003e\r\n\u003cli\u003eInput impedance : 10kΩ per leg\u003c\/li\u003e\r\n\u003cli\u003eAmplifier output power : Bass 200W continuous, HF 50W continuous (1%THD)\u003c\/li\u003e\r\n\u003cli\u003eCrossover frequency : 2.1kHz\u003c\/li\u003e\r\n\u003cli\u003eCrossover filters : 2nd order\/ 12dB\/oct critically damped with phase compensation\u003c\/li\u003e\r\n\u003cli\u003eLow frequency shelf cut\/boost : 80Hz, -2dB to +3dB in 1dB steps (via rear panel rotary switch)\u003c\/li\u003e\r\n\u003cli\u003eOverload protection : Active FET momentary gain reduction (inc. front panel mounted ‘limit’ LED)\u003c\/li\u003e\r\n\u003cli\u003eAmplifier thermal trip circuit\u003c\/li\u003e\r\n\u003cli\u003eCabinet Dimensions (HxWxD) : 450x250x392mm (17.7″x8.8″x15.4″)\u003c\/li\u003e\r\n\u003cli\u003eWeight : 28kg\/61.6lbs (per cabinet)\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47248530145417,"sku":"112962","price":3436.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-scm20asl_112962_1_cac9d0da-1bae-40e6-880c-9d36723848ca.jpg?v=1784048302"},{"product_id":"atc-loudspeakers-12p1pro-bundle-demo-deal","title":"ATC Loudspeakers 12P1PRO Bundle (Demo Deal)","description":"\u003cp\u003eAs an all-new design, the ATC Loudspeakers SCM12 Pro's acclaimed performance at a lower price point without compromising component quality and achieves this in a more compact, installation-friendly footprint ideally suited to nearfield monitoring as well as multichannel music and post-production applications. The \u003cstrong\u003eATC Loudspeakers 12P1PRO Bundle\u003c\/strong\u003e includes one pair of SCM12 Pro Speakers and one P1 Pro Dual-Mono Power Amplifier.\u003c\/p\u003e  \u003chr\u003e   \u003cp\u003e\u003cem\u003e“Anyone who has been waiting for an ATC nearfield with a smaller footprint, that is more easily installed, or that is more affordable, yet still delivers undiminished ATC performance, then the SCM12 Pro could be for them.”\u003c\/em\u003e says ATC Technical Sales Manager Ben Lilly, before adding: \u003cem\u003e“ATC R\u0026amp;D Manager Richard Newman has poured the same knowhow, time, and passion into this new model that has made the rest of the professional product line so successful. Users will find that productions completed using the SCM12 Pro will translate beautifully to other systems and that their incredibly low distortion makes listening to them a pleasure — even after long hours in the studio. At under £1,150.00 per pair, they may prove ideal for those seeking to upgrade ageing, hard-to-repair passive studio monitors.”\u003c\/em\u003e\u003c\/p\u003e  \u003chr\u003e   \u003ch3\u003eSCM12\u003c\/h3\u003e  \u003cp\u003eThough the SCM12 Pro is the most affordable model in the professional range of loudspeakers, the monitor makes use of the ATC’s celebrated drive units for both the mid\/bass and tweeter, both being meticulously hand built at the UK facility.\u003c\/p\u003e  \u003cp\u003eThe tweeter is a 25mm\/one-inch soft-dome designed around ATC’s unique dual-suspension technology. Unlike conventional tweeters, this precision part employs two suspensions, offering far greater control of the voice coil and dome motion — especially at higher sound pressure levels. The result is an extended high-frequency response with much greater clarity and definition due to the reduction in disturbing an-harmonic distortion. Listener fatigue is also greatly reduced, resulting in users being able to work for longer periods with greater accuracy.\u003c\/p\u003e  \u003cp\u003eAt the lower end of the frequency spectrum, mid\/bass reproduction is handled by ATC’s 150mm\/six-inch proprietary CLD drive unit. Using a 45mm\/1.75-inch diameter voice coil, and employing an FEA (Finite Element Analysis) optimised high-energy symmetric gap motor system, the driver is capable of tremendous dynamic range with minimal power compression. Cone construction is courtesy of another proprietary ATC technology that represents another advance in driver performance — namely, Constrained Layer Damping (CLD), a process that uses multiple laminated fabric cones to form a stiff, light, and tremendously well-damped structure. Speaking acoustically, this construction creates a smoother on- and off-axis frequency response and also a reduction in distortion leading to a more lifelike reproduction of source material. Meaningfully, judgements and decisions can be made more quickly, more accurately, and for longer periods of time by busy working audio professionals.\u003c\/p\u003e  \u003cp\u003ePut it another way: by employing exceptional drive units, the passive crossover can, by design, use the minimum number of components in a simple, second-order implementation. Indeed, the capacitors are all 250Vdc metalized polypropylene and all the inductors are air-cored types for minimal signal distortion. Additionally, all of the inductors are wound in house with very high-purity copper while large-gauge wire is used for the bass components to minimize signal losses.\u003c\/p\u003e  \u003cp\u003eLooking beyond the release of the superb-sounding SCM12 Pro, an install-specific sibling, the SCM12i, will be available as of Q1 2017. This model will feature threaded mounting points to mate with widely-available wall and ceiling brackets from K\u0026amp;M and Adaptive Technologies to simplify installation — incredibly useful in complex multichannel systems, such as those required by Auro 3-D, Dolby ATMOS, or DTS:X.\u003c\/p\u003e  \u003cp\u003eDiscerning audio professionals always appreciate that exceptional passive monitors require exceptional amplification; as far as the SCM12 Pro is concerned, the best possible results will be achieved when it is partnered with ATC’s own range of stereo power amplifiers. As such, the 150 W per-channel P1 Pro dual-mono power amplifier is the perfect partner — both in terms of power output and its outstanding resolution, resulting from technology originally developed for ATC’s high-end active monitoring systems. So customers can comfortably make the upgrade to an all-ATC monitoring and amplification system, an attractive package price will be offered for purchasing the two products simultaneously.\u003c\/p\u003e  \u003cp\u003eSimple, well-engineered products almost always trump feature-rich, cost-engineered alternatives, and ATC’s SCM12 Pro has been duly designed with that philosophy very much intact. Its neutral fidelity makes it a very versatile proposition, one which — when backed up with the company’s industry-leading six-year warranty — makes for a high-value, longterm investment for anyone looking to upgrade their monitoring system. So now is the time to consider EQ’ing, balancing, and editing faster, with more consistent results and reduced listening fatigue using the latest nearfield monitoring marvel from ATC.\u003c\/p\u003e     \u003ch3\u003eSPECIFICATIONS:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eDrivers: HF ATC 1˝\/25 mm dual suspension Soft Dome (SH25-76 6 Ohm) \/ LF ATC 6˝\/150 mm Constrained Layer Damping (CLD) (SB50-150CLD 8 Ohm)\u003c\/li\u003e \u003cli\u003eAmplitude Linearity: 80 Hz – 16 kHz (±2 dB)\u003c\/li\u003e \u003cli\u003eCut Off Frequencies: 56 Hz – 22 kHz (-6 dB freestanding)\u003c\/li\u003e \u003cli\u003eDispersion: ±80° Coherent Horizontal, ±10° Coherent Vertical\u003c\/li\u003e \u003cli\u003eMaximum Continuous SPL: 108dB (per pair @ 1m)\u003c\/li\u003e \u003cli\u003eCrossover Frequency: 2.2 kHz\u003c\/li\u003e \u003cli\u003eRecommended Power Amplifier: 75 to 300 Watts\u003c\/li\u003e \u003cli\u003eNominal Impedance: 8 Ohm\u003c\/li\u003e \u003cli\u003eConnectors: Binding Posts\/4mm Plugs, bi-wire\u003c\/li\u003e \u003cli\u003eCabinet Dimensions (HxWxD): 400 x 238 x 235 mm\/15.7˝ x 9.4˝ x9.3˝\u003c\/li\u003e \u003cli\u003eWeight: 11 kg\/24 lbs (per cabinet)\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eP1 Pro\u003c\/h3\u003e  \u003cp\u003eThe ATC P1 Pro is a high-quality class A\/B power amplifier designed to power ATC passive monitors. The ATC P1 Pro features 150W per channel with a true dual mono design with the power supply signal being totally separated from the return paths ensuring minimum crosstalk and maximum separation. Another advantage of such a design is that intermodulation between channels is reduced to the minimum at all frequencies and that power on one channel doesn’t affect the other. With balanced XLR inputs and unbalanced RCA inputs ensures that the ATC P1 Pro fits perfectly in your system. In addition, each channel features two phono input sockets and a “Link” input phono for connecting two amps together when using a sub for example. Outputs are proprietary ATC connectors with red and black terminals to ensure correct connections. The P1 Pro fits into a 19” rack and includes a remote trigger for send the unit in standby. Several LEDS indicate the different status of the amp with a green light indicating that the amplifier is active and a red light indicating standby mode. Additional LEDs include “Clip”, “Error Left” and “Error Right” are added as indication of the incoming levels. A Protect mode is also included whereby the amplifier will shut down. This feature is designed to protect the amp and the monitors.\u003c\/p\u003e  \u003ch3\u003eFEATURES:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003e150 W per channel\u003c\/li\u003e \u003cli\u003eClass A\/B operation\u003c\/li\u003e \u003cli\u003eHand built in the UK\u003c\/li\u003e \u003cli\u003eTrue dual mono design\u003c\/li\u003e \u003cli\u003eBalanced and unbalanced inputs\u003c\/li\u003e \u003cli\u003eAmplifier link output\u003c\/li\u003e \u003cli\u003e19″ rack mountable\u003c\/li\u003e \u003cli\u003eFront “standby” button\u003c\/li\u003e \u003cli\u003e6 year warranty\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eSPECIFICATIONS:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eOutput Power into 8 Ω: 150 W\u003c\/li\u003e \u003cli\u003eInput Sensitivity: 2 V RMS\u003c\/li\u003e \u003cli\u003eInput Impedance: 10 kΩ\/leg\u003c\/li\u003e \u003cli\u003eFrequency Response: 400 kHz (-3 dB)\u003c\/li\u003e \u003cli\u003eSignal to noise ratio: \u0026gt;110 dB (DIN)\u003c\/li\u003e \u003cli\u003eCrosstalk: \u0026gt;100 dB\u003c\/li\u003e \u003cli\u003eTHD: \u0026gt;0.002%\/-95 dB\u003c\/li\u003e \u003cli\u003eDimensions (HxWxD): 145 x 483 x 366 mm\u003c\/li\u003e \u003c\/ul\u003e","brand":"ATC Loudspeakers","offers":[{"title":"Default Title","offer_id":47248559997065,"sku":"116474","price":3139.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/8706\/5737\/files\/atc-12p1-pro_62960_1_1_5f617921-b281-441c-84f1-7252f4e70f5f.jpg?v=1784048401"}],"url":"https:\/\/vintage-king-staging.myshopify.com\/collections\/atc-loudspeakers.oembed","provider":"Vintage King Staging","version":"1.0","type":"link"}